1. LinuxCNC
  3. General LinuxCNC Questions
  5. Linuxcnc with Remora on BTT SKR PRO V1.2 Help

Linuxcnc with Remora on BTT SKR PRO V1.2 Help

More
08 Feb 2025 03:31 #320954 by JR5X
Linuxcnc with Remora on BTT SKR PRO V1.2 Help was created by JR5X
I am new to LinuxCNC. I just performed a fresh installation using (rpi-4-debian-bookworm-6.12.11-arm64-ext4-2025-01-27-0404.img) with the Remora component. Can someone guide me step by step on how to set it up with a BTT SKR PRO V1.2?


Thanks,

Please Log in or Create an account to join the conversation.

More
08 Feb 2025 06:19 #320976 by cakeslob
Replied by cakeslob on topic Linuxcnc with Remora on BTT SKR PRO V1.2 Help
remora-docs.readthedocs.io/en/latest/development/checklist.html

remora-docs.readthedocs.io/en/latest/

forum.linuxcnc.org/18-computer/42276-rem...rocontroller-via-spi

Please Log in or Create an account to join the conversation.

  1. LinuxCNC
  3. General LinuxCNC Questions
  5. Linuxcnc with Remora on BTT SKR PRO V1.2 Help
Time to create page: 0.210 seconds
Powered by Kunena Forum