network issues
- n_ne
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
11 Mar 2025 06:44 #323653
by n_ne
network issues was created by n_ne
I am new to linuxcnc and I cannot get my Raspberry pi running linuxcnc to connect to wifi or to my mesa 7I92TM board. I tried ip a but the mesa board is not showing have looked everywhere online and read multiple forums but can't seem to find a proper solution to my problem. Please help.
Please Log in or Create an account to join the conversation.
- unknown
- Offline
- Elite Member
-
Less
More
- Posts: 283
- Thank you received: 101
11 Mar 2025 11:30 #323668
by unknown
Replied by unknown on topic network issues
Goto the forum section of Installing Linuxcnc.
Click on the sticky for the RPi images.
Read the whole thread. The answers are there.
That's what the purpose of that particular thread is for.
Click on the sticky for the RPi images.
Read the whole thread. The answers are there.
That's what the purpose of that particular thread is for.
The following user(s) said Thank You: n_ne
Please Log in or Create an account to join the conversation.
Time to create page: 0.049 seconds