Position: relative expected

Oh yes, i did disagree with that statement, silently, as he might have experience with "Home" or "Office" types of HP computers and those are frankly cr@p, but "Enterprise" HP computers and workstations are magnificent in every way and some have 700W or 1000W power supplies despite no way of cramming stuff in it to require that kind of power. Same goes for Dell and Lenovo and Fujitsu and older Fujitsu-Siemens, all of those in the "Enterprise" edition work perfectly, no matter how old, and using them 24/7 is a given.
And yes, there are many of us here using HP even on industrial machines, as again, they never fail.

HP 800 G2 SFF and HP 800 G3 SFF with Intel network are perfect with Mesa cards. No issues, except replacing a noisy CPU fan

MaHa, why you up so early?
4:40AM here, going to bed right now.
And whatever the reason you are up so early, i hope it's a good one.

I was completing and testing my new parameter subroutine for helical inside or outside contour ramp, adjustable stepover and x/y/z allowance finishing cut. Took the whole night to iron out some misbehaviour

 

Nice, glad you have such reasons, i've been out of commission for exactly 3 weeks now due to sticking my finger where it does not belong, it is astonishing how a messed up finger tip can limit the ability to work... or just brush teeth. This brushing teeth with left hand was absolutely hilarious for several days as i was shaking my whole body doing it! Got used to it though.
BTW, 3 weeks and still can not remove stitches as the swelling has not subsided sufficiently.

Failed again to leave my workshop early.
Sorry i am blessed with writing jam at the moment, but good luck for recovery from the injury