Date and time synchronization
- bharath12
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 1
01 Sep 2025 18:28 #334236
by bharath12
Date and time synchronization was created by bharath12
I had installed LinuxCNC a few months back, but I didn't use it. I tried two days back to install Arduino, and the date is showing wrong on the taskbar, and I am unable to connect to the internet for browsing.
Let me know what I can do best. I always check the CMOS battery on Windows to see if it is good or not, but this motherboard is under warranty.
Let me know what I can do best. I always check the CMOS battery on Windows to see if it is good or not, but this motherboard is under warranty.
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23527
- Thank you received: 5005
02 Sep 2025 12:04 #334260
by andypugh
Replied by andypugh on topic Date and time synchronization
I think that, if you connected to the internet, the date and time would correct themselves. So I would start with debugging the internet connection.
Please Log in or Create an account to join the conversation.
- bharath12
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 1
02 Sep 2025 12:23 #334262
by bharath12
Replied by bharath12 on topic Date and time synchronization
The internet is connected, but the browser is not allowed to browse because of the date and time. When I installed LinuxCNC, everything was working.
Please Log in or Create an account to join the conversation.
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23527
- Thank you received: 5005
02 Sep 2025 12:26 #334264
by andypugh
Replied by andypugh on topic Date and time synchronization
This is a general Linux / Debian question rather than a LinuxCNC question, so you might need to broaden your search.
raspberrytips.com/set-date-time-linux/
Might help?
raspberrytips.com/set-date-time-linux/
Might help?
Please Log in or Create an account to join the conversation.
Time to create page: 0.100 seconds