Joint following error all axis
- tommylight
-
- Offline
- Moderator
-
Less
More
8 months 2 weeks ago #342888
by tommylight
Replied by tommylight on topic Joint following error all axis
Z400 are very good, so i would not change it, but in case you have issues again, try removing memory modules, never happened to me on a Z400, but happens sometimes on Z420 and happens a lot on Z600, at boot reports of memory issues that mostly disappear on their own.
The following user(s) said Thank You: MarcNL
Please Log in or Create an account to join the conversation.
8 months 2 weeks ago #342890
by MarcNL
Replied by MarcNL on topic Joint following error all axis
Okay, will try that when problems retturn. Thanks!
The following user(s) said Thank You: tommylight
Please Log in or Create an account to join the conversation.
- tommylight
-
- Offline
- Moderator
-
8 months 2 weeks ago #342909
by tommylight
Replied by tommylight on topic Joint following error all axis
You are welcomed, always.
Please Log in or Create an account to join the conversation.
Time to create page: 0.142 seconds