shared home/limit swiches

  • tuxcnc
  • Away
  • Elite Member
  • Elite Member
More
12 Aug 2026 03:27 #348662 by tuxcnc
Replied by tuxcnc on topic shared home/limit swiches
I can't help you.
I gave you working example.
You only have to remove from your config unnecessary stuff and replace parport pin by mesa pin.
But you see only that is one line not many...

Please Log in or Create an account to join the conversation.

Time to create page: 0.092 seconds
Powered by Kunena Forum