Mesa 7i96s to Gecko G540 with simple 3 axis Router

1 month 2 weeks ago #349717 by DougS

Replied by DougS on topic Mesa 7i96s to Gecko G540 with simple 3 axis Router

I tried that and get the following error:

Pin 'hm2_7i96s.0.gpio.000.in-not' does not exist

Works okay without the -not

Please Log in or Create an account to join the conversation.

1 month 2 weeks ago #349718 by DougS

Replied by DougS on topic Mesa 7i96s to Gecko G540 with simple 3 axis Router

weird but this works
{HMOT](CARD0).inm.00.input-00-not

Thanks

Please Log in or Create an account to join the conversation.

1 month 2 weeks ago - 1 month 2 weeks ago #349719 by PCW

Replied by PCW on topic Mesa 7i96s to Gecko G540 with simple 3 axis Router

For GPIO it's in_not

INM is a better choice for inputs though because it has built-in
debouncing if needed.

Last edit: 1 month 2 weeks ago by PCW.

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

Time to create page: 0.097 seconds