no 7i43 on linuxcnc 2.9.1 pncconf???
- andypugh
-
- Offline
- Moderator
-
Less
More
- Posts: 23288
- Thank you received: 4938
11 Dec 2023 11:07 #287843
by andypugh
Replied by andypugh on topic no 7i43 on linuxcnc 2.9.1 pncconf???
I added the legacy firmware debs to Bullseye and Bookworm yesterday.
You should be able to "sudo apt-get install hostmot2-firmware-7i43" now. Or get it via the Synaptic package manager.
www.linuxcnc.org/dists/bookworm/base/binary-all/
(alternatively hostmot2-firmware-all if you want to install all of them)
You should be able to "sudo apt-get install hostmot2-firmware-7i43" now. Or get it via the Synaptic package manager.
www.linuxcnc.org/dists/bookworm/base/binary-all/
(alternatively hostmot2-firmware-all if you want to install all of them)
Please Log in or Create an account to join the conversation.
- cmorley
- Offline
- Moderator
-
Less
More
- Posts: 7873
- Thank you received: 2127
11 Dec 2023 13:44 #287852
by cmorley
Replied by cmorley on topic no 7i43 on linuxcnc 2.9.1 pncconf???
Thanks Andy!
Please Log in or Create an account to join the conversation.
- bobwolf
- Offline
- Senior Member
-
Less
More
- Posts: 49
- Thank you received: 4
11 Dec 2023 13:50 #287853
by bobwolf
Replied by bobwolf on topic no 7i43 on linuxcnc 2.9.1 pncconf???
Thank you very much for your interest
ciao
Roberto
ciao
Roberto
Please Log in or Create an account to join the conversation.
Moderators: cmorley
Time to create page: 0.093 seconds