Lathe GUI for me
- Dinuka_Shehan
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 346
- Thank you received: 26
24 Jul 2019 16:19 #140438
by Dinuka_Shehan
Lathe GUI for me was created by Dinuka_Shehan
What is the best gui for lathe mode?
Please Log in or Create an account to join the conversation.
24 Jul 2019 17:41 #140444
by pl7i92
Replied by pl7i92 on topic Lathe GUI for me
Axis gives you the Best options
but it is best to go for a Have automatic setup as shown here
but it is best to go for a Have automatic setup as shown here
The following user(s) said Thank You: Dinuka_Shehan
Please Log in or Create an account to join the conversation.
- Dinuka_Shehan
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 346
- Thank you received: 26
25 Jul 2019 07:54 - 25 Jul 2019 07:58 #140514
by Dinuka_Shehan
Replied by Dinuka_Shehan on topic Lathe GUI for me
Thank you
I have already watched and downloaded the files from the link on this Youtube video before you comment their.
It is good gui.Can I translate in to English.Some words are in Russian(Global Variables)
Don't you any other gui's?
I have already watched and downloaded the files from the link on this Youtube video before you comment their.
It is good gui.Can I translate in to English.Some words are in Russian(Global Variables)
Don't you any other gui's?
Last edit: 25 Jul 2019 07:58 by Dinuka_Shehan.
Please Log in or Create an account to join the conversation.
25 Jul 2019 09:34 #140518
by Hakan
Replied by Hakan on topic Lathe GUI for me
I only use gmoccapy and a touch screen. I don't see why axis should be extra good.
The buttons are very small and difficult to hit for example.
The buttons are very small and difficult to hit for example.
The following user(s) said Thank You: Dinuka_Shehan
Please Log in or Create an account to join the conversation.
- Dinuka_Shehan
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 346
- Thank you received: 26
25 Jul 2019 19:00 #140557
by Dinuka_Shehan
Replied by Dinuka_Shehan on topic Lathe GUI for me
Ok Hakan.
You you got any video about your Cnc lathe machine
You you got any video about your Cnc lathe machine
Please Log in or Create an account to join the conversation.
25 Jul 2019 22:02 #140574
by Hakan
Replied by Hakan on topic Lathe GUI for me
Sure I have.
The following user(s) said Thank You: Dinuka_Shehan
Please Log in or Create an account to join the conversation.
28 Jul 2019 18:06 #140827
by andypugh
Replied by andypugh on topic Lathe GUI for me
I use Touchy and the same macros as Hakan.
I do not have any graphical preview set up with Touchy, but I don't really miss it.
forum.linuxcnc.org/41-guis/26550-lathe-macros?start=150#82743
I do not have any graphical preview set up with Touchy, but I don't really miss it.
forum.linuxcnc.org/41-guis/26550-lathe-macros?start=150#82743
The following user(s) said Thank You: Dinuka_Shehan
Please Log in or Create an account to join the conversation.
Time to create page: 0.076 seconds