LinuxCNC Meetup Germany, 16.-18. December 2016
09 Dec 2016 23:38 - 09 Dec 2016 23:39 #83858
by Shu
LinuxCNC Meetup Germany, 16.-18. December 2016 was created by Shu
Vom 16.-18.12.2016 ist das diesjährige LinuxCNC Treffen, wieder in Stuttgart.
An dem ganzen Wochenende, Freitag-Sonntag.
Previous events:
2013: wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxC...Meeting_2013_Germany
2014: wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxC...Meeting_2014_Germany
Place: Camflight, Löwentorstraße 68 / Bau VI, 70376 Stuttgart
There will be a demo of STMBL: github.com/rene-dev/stmbl
doodle.com/poll/w52962an5pxgatsi
An dem ganzen Wochenende, Freitag-Sonntag.
Previous events:
2013: wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxC...Meeting_2013_Germany
2014: wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxC...Meeting_2014_Germany
Place: Camflight, Löwentorstraße 68 / Bau VI, 70376 Stuttgart
There will be a demo of STMBL: github.com/rene-dev/stmbl
doodle.com/poll/w52962an5pxgatsi
Last edit: 09 Dec 2016 23:39 by Shu.
Please Log in or Create an account to join the conversation.
09 Dec 2016 23:38 #83859
by Shu
Replied by Shu on topic LinuxCNC Meetup in Stuttgart, Germany
I have some spare parts to offer, ping me if you are interested and I'll bring them with me to the meetup.
large ball screw assemblies (3210)
linear guides
SMD reels, mostly passives
Atmega 328 (smd), ESP8266 (Flash 4Mbit<, modules), MPU6050 modules
carbide v-bits for engraving (1/8" = 3.175mm shaft)
PCBs for Avoccado boards (avoccado.etemu.com/ )
LED strips 12V, warm white
Need:
a VFD with vector control (0.3-1.5kW)
large ball screw assemblies (3210)
linear guides
SMD reels, mostly passives
Atmega 328 (smd), ESP8266 (Flash 4Mbit<, modules), MPU6050 modules
carbide v-bits for engraving (1/8" = 3.175mm shaft)
PCBs for Avoccado boards (avoccado.etemu.com/ )
LED strips 12V, warm white
Need:
a VFD with vector control (0.3-1.5kW)
Please Log in or Create an account to join the conversation.
Time to create page: 0.061 seconds