loadrt or2

More
08 Nov 2019 16:02 #149924 by Edi_48
loadrt or2 was created by Edi_48
Hallo ich möchte gerne einen Werkzeuglengensenor und einen Touch probe Vers Pr benutzen.
Da ich ja nur eine senor an die Mesa 7i76e anschliessen kann, habe ich jetzt das hier gefunden

loadrt or2
...
addf o2.0 servo-thread
...
net probe-in <= hm2-7i76e.0.7i76.0.0.input-04-not
Nettolänge-in <= hm2-7i76e.0.7i76.0.0.input-05-not
net probe-in => or2.0.in0
net probe-in => or2.0.in1
net probe-or-length or2.0.out
net probe-or-length motion.probe-input

ab was für einen Linuxcnc läuft dies , ich habe Debian 9 und Linuxcnc 2.7.14

Please Log in or Create an account to join the conversation.

More
08 Nov 2019 16:57 - 08 Nov 2019 16:58 #149929 by tommylight
Replied by tommylight on topic loadrt or2

Hallo ich möchte gerne einen Werkzeuglengensenor und einen Touch probe Vers Pr benutzen.
Da ich ja nur eine senor an die Mesa 7i76e anschliessen kann, habe ich jetzt das hier gefunden

loadrt or2
...
addf o2.0 servo-thread <<<<<OR2 ????
...
net probe-in <= hm2-7i76e.0.7i76.0.0.input-04-not
Nettolänge-in <= hm2-7i76e.0.7i76.0.0.input-05-not
net probe-in => or2.0.in0
net probe-in => or2.0.in1
net probe-or-length or2.0.out
net probe-or-length motion.probe-input

ab was für einen Linuxcnc läuft dies , ich habe Debian 9 und Linuxcnc 2.7.14

Last edit: 08 Nov 2019 16:58 by tommylight.

Please Log in or Create an account to join the conversation.

More
08 Nov 2019 17:18 #149932 by Mike_Eitel
Replied by Mike_Eitel on topic loadrt or2
Neben dem von Tommy:
zusätzlich noch den zweiten Eingang anpassen

net probe-in <= hm2-7i76e.0.7i76.0.0.input-04-not
Nettolänge-in <= hm2-7i76e.0.7i76.0.0.input-05-not
net probe-in => or2.0.in0
Nettolänge-in => or2.0.in1

Ist das eigentlich Dein erstes OR2 Element?
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
09 Nov 2019 06:54 #149963 by Edi_48
Replied by Edi_48 on topic loadrt or2
Ja ist mein erstes, habe dieses Hier gefunden

Please Log in or Create an account to join the conversation.

More
09 Nov 2019 08:19 #149966 by pl7i92
Replied by pl7i92 on topic loadrt or2
hallo edi
du bekommst probleme wenn du umlaute nutzt und auch die Grossschreibung wird dir probleme bereiten

nettolaenge ist besser

die 7u76 kann doch an jedem port eine sensor aufnehmen
oder ist dein sensor mit analog ausgang 0-10V
das ist dich nur ein ein/aus teil

somit brauchst du das doch garnicht

Please Log in or Create an account to join the conversation.

More
09 Nov 2019 09:38 #149973 by Edi_48
Replied by Edi_48 on topic loadrt or2
Hallo pI7i92
kann ich
net probe-input motion.probe-input <= <= hm2_7i76e.0.7i76.0.0.input-03
net probe-input motion.probe-input <= <= hm2_7i76e.0.7i76.0.0.input-04
eingeben ?

Please Log in or Create an account to join the conversation.

More
09 Nov 2019 10:35 #149974 by pl7i92
Replied by pl7i92 on topic loadrt or2
nein
so
net probe-input-A or2.0.in0 <= hm2_7i76e.0.7i76.0.0.input-03
net probe-input-B or2.0.in1 <= hm2_7i76e.0.7i76.0.0.input-04
net probe-input motion.probe-input <= or2.0.out

or2.0 natürlich mit servo tread

Please Log in or Create an account to join the conversation.

Time to create page: 0.533 seconds
Powered by Kunena Forum