Forum Menu

M 100 Code

More
3 years 7 months ago #265699 by Steff87
Replied by Steff87 on topic M 100 Code
Hier die Bildschirmfotos

Please Log in or Create an account to join the conversation.

More
3 years 7 months ago #265702 by MaHa
Replied by MaHa on topic M 100 Code
Ich würde M112 mal Versuchsweise in ncfiles ablegen, nochmals die Berechtigung prüfen, und linuxcnc neu starten.

Please Log in or Create an account to join the conversation.

More
3 years 7 months ago #265705 by Steff87
Replied by Steff87 on topic M 100 Code
Hab ich grad gemacht. Auch nichtsimage missing /media/kunena/emoticons/sad.png

Please Log in or Create an account to join the conversation.

More
3 years 7 months ago #265707 by MaHa
Replied by MaHa on topic M 100 Code
Bei meinen M codes setzte ich 1 oder 0 und nicht true/false

Please Log in or Create an account to join the conversation.

More
3 years 7 months ago #265709 by Steff87
Replied by Steff87 on topic M 100 Code
Ändert auch nichts

Please Log in or Create an account to join the conversation.

More
3 years 7 months ago #265722 by chris@cnc
Replied by chris@cnc on topic M 100 Code
In der ini ist ganz oben unter [EMC] der Paramter Debug.
github.com/LinuxCNC/linuxcnc/blob/master...ml_intf/debugflags.h
Wenn du den in 0x7FFFFFFF änderst werden alle Informationen im Terminal angezeigt. Was passiert wenn du den M Befehl ausführst?


 

Please Log in or Create an account to join the conversation.

Moderators: Muecke
Time to create page: 0.070 seconds
Powered by Kunena Forum