READ THIS before Posting

More
06 Dec 2010 12:44 - 18 Dec 2010 13:05 #5882 by BigJohnT
If someone could translate this to German that would be nice.

Thanks
John
Last edit: 18 Dec 2010 13:05 by BigJohnT.

Please Log in or Create an account to join the conversation.

More
06 Dec 2010 13:17 #5885 by step4linux
Achtung:
Bitte in diesem Forum keine Umlaute, Akzente, deutsche Anführungszeichen etc verwenden, nur den Standard US Zeichensatz.
Andernfalls wird der gesamte Beitrag nicht angezeigt.

Gerd, on behalf of BigJohnT

Please Log in or Create an account to join the conversation.

More
06 Dec 2010 13:43 #5886 by step4linux
I'm a stupid guy, but I prove what I written. I used a german ue and that is not allowed.
Now cannot edit it

Please Log in or Create an account to join the conversation.

More
06 Dec 2010 13:44 #5887 by step4linux
Achtung:
Bitte in diesem Forum keine Umlaute, Akzente, deutsche Anfuehrungszeichen etc verwenden, nur den Standard US Zeichensatz.
Andernfalls wird der gesamte Beitrag nicht angezeigt.

Gerd, on behalf of BigJohnT

Please Log in or Create an account to join the conversation.

More
06 Dec 2010 14:07 #5890 by BigJohnT
Gerd,

Thanks for translating that for me. For some strange reason the German ue does not cause a problem as your first post shows up.

Thanks
John

Please Log in or Create an account to join the conversation.

More
06 Dec 2010 14:43 #5891 by step4linux
it does on my side!
it prevents me posting any reply to any thread, only "quick reply" was possible.
Now I rebooted the PC and its ok. Strange.

Please Log in or Create an account to join the conversation.

More
18 Dec 2010 13:07 #6137 by BigJohnT
I think someone has fixed it so other characters show up so if someone with a German keyboard can type a little test message...

John

Please Log in or Create an account to join the conversation.

More
18 Dec 2010 18:01 - 18 Dec 2010 18:02 #6143 by andypugh
Ich känn nicht Deütsch ßprechen, aber Içh känn type funny characters….

Hurrah! It works
Last edit: 18 Dec 2010 18:02 by andypugh. Reason: Celebration

Please Log in or Create an account to join the conversation.

Time to create page: 0.169 seconds
Powered by Kunena Forum