Setup for plasma cutting need help
14 Jul 2012 23:17 #21954
by ricky_a
Setup for plasma cutting need help was created by ricky_a
How do I set linuxcnc for plasma cutting
Please Log in or Create an account to join the conversation.
15 Jul 2012 11:02 #21959
by BigJohnT
Replied by BigJohnT on topic Re:Setup for plasma cutting need help
I use m3 and m5 on mine.
John
John
Please Log in or Create an account to join the conversation.
15 Jul 2012 20:34 #21969
by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
where do I find it
Please Log in or Create an account to join the conversation.
15 Jul 2012 22:22 #21973
by BigJohnT
Replied by BigJohnT on topic Re:Setup for plasma cutting need help
Please Log in or Create an account to join the conversation.
16 Jul 2012 10:23 #21988
by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
Okay but what is m3 and m5.
Please Log in or Create an account to join the conversation.
16 Jul 2012 10:37 #21989
by Rick G
Replied by Rick G on topic Re:Setup for plasma cutting need help
Please Log in or Create an account to join the conversation.
16 Jul 2012 14:47 #21995
by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
Please Log in or Create an account to join the conversation.
16 Jul 2012 14:47 #21996
by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
Please Log in or Create an account to join the conversation.
16 Jul 2012 14:51 - 16 Jul 2012 14:55 #21998
by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
Last edit: 16 Jul 2012 14:55 by ricky_a.
Please Log in or Create an account to join the conversation.
16 Jul 2012 14:53 #21999
by ricky_a
Replied by ricky_a on topic Re:Setup for plasma cutting need help
Please Log in or Create an account to join the conversation.
Time to create page: 0.094 seconds