Home Switch Back Off
24 Jan 2013 02:55 #29039
by mmt
Home Switch Back Off was created by mmt
When homing, the axis trips the home switch then it reverses a short distance.
Could someone please tell where to adjust how far it travels in the reverse direction?
I need it to back off just a few thousandths more due to the type of switches that I am using.
Thanks
Could someone please tell where to adjust how far it travels in the reverse direction?
I need it to back off just a few thousandths more due to the type of switches that I am using.
Thanks
Please Log in or Create an account to join the conversation.
24 Jan 2013 03:33 #29041
by cncbasher
Replied by cncbasher on topic Home Switch Back Off
look in your ini file linuxcnc/configs/name of config /
and adjust the appropriate HOME for axis required
and adjust the appropriate HOME for axis required
Please Log in or Create an account to join the conversation.
24 Jan 2013 18:52 #29075
by Rick G
Replied by Rick G on topic Home Switch Back Off
Please Log in or Create an account to join the conversation.
24 Jan 2013 21:14 #29083
by BigJohnT
Set your home offset in the ini.
John
Replied by BigJohnT on topic Home Switch Back Off
When homing, the axis trips the home switch then it reverses a short distance.
Could someone please tell where to adjust how far it travels in the reverse direction?
I need it to back off just a few thousandths more due to the type of switches that I am using.
Thanks
Set your home offset in the ini.
John
Please Log in or Create an account to join the conversation.
Time to create page: 0.113 seconds