Mesa 4i65 Realtime delay in task 1
29 Sep 2014 17:38 - 29 Sep 2014 18:15 #51651
by hardware_crash
Mesa 4i65 Realtime delay in task 1 was created by hardware_crash
Hey guys,
Now that I have my config with the Mesa 4i65 and SmartSerial via Mesa 7i44 Up an running I get some Realtime delay errors after about 20 Sec. linuxcnc is running.
I tried changing some setting in the Boards Bios but that didnt change anything
I also checked for overruns with no results..
The latency check gives good results.
The board im using is a Mini-ITX Mainboard (MB896IL)with a Pentium M (1,7GHz) and 1GB DDR2 Ram
The dmesg output is as follows:
The error linuxcnc reports is:
maybe someone can help
Now that I have my config with the Mesa 4i65 and SmartSerial via Mesa 7i44 Up an running I get some Realtime delay errors after about 20 Sec. linuxcnc is running.
I tried changing some setting in the Boards Bios but that didnt change anything
I also checked for overruns with no results..
The latency check gives good results.
The board im using is a Mini-ITX Mainboard (MB896IL)with a Pentium M (1,7GHz) and 1GB DDR2 Ram
The dmesg output is as follows:
user@cnc:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4-9-rtai-686-pae (Debian 3.4.55-3linuxcnc) () (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP PREEMPT Debian 3.4.55-3linuxcnc
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.2 present.
[ 0.000000] DMI: /Alviso, BIOS 6.00 PG 11/15/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f6f0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 03F700000 mask FFFF00000 write-through
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 0x377fdfff @ [mem 0x017f8000-0x017fffff]
[ 0.000000] RAMDISK: 3642e000 - 3720f000
[ 0.000000] ACPI Error: A valid RSDP was not found (20120320/tbxfroot-219)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f6f0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6f0
[ 0.000000] On node 0 totalpages: 259711
[ 0.000000] free_area_init_node: node 0, pgdat c1498a00, node_mem_map f5c3e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32244 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f700000 (gap: 3f700000:a0900000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 17 pages/cpu @f77e6000 s48384 r0 d21248 u69632
[ 0.000000] pcpu-alloc: s48384 r0 d21248 u69632 alloc=17*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257681
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.4-9-rtai-686-pae root=UUID=1f1023bd-f1ab-48bb-81b6-bc3dfb6b6506 ro initrd=/install/gtk/initrd.gz lapic quiet rootdelay=5
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2078464 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f6f0)
[ 0.000000] Memory: 1007716k/1039296k available (3495k kernel code, 31128k reserved, 1237k data, 416k init, 129992k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14a0000 - 0xc1508000 ( 416 kB)
[ 0.000000] .data : 0xc1369d0a - 0xc149f480 (1237 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1369d0a (3495 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5806000 soft=f5808000
[ 0.000000] Interrupt pipeline (release #3)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1733.233 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3466.46 BogoMIPS (lpj=6932932)
[ 0.004008] pid_max: default: 32768 minimum: 301
[ 0.004070] Security Framework initialized
[ 0.004079] AppArmor: AppArmor disabled by boot time parameter
[ 0.004103] Mount-cache hash table entries: 512
[ 0.004395] Initializing cgroup subsys cpuacct
[ 0.004399] Initializing cgroup subsys memory
[ 0.004411] Initializing cgroup subsys devices
[ 0.004414] Initializing cgroup subsys freezer
[ 0.004418] Initializing cgroup subsys net_cls
[ 0.004421] Initializing cgroup subsys blkio
[ 0.004432] Initializing cgroup subsys perf_event
[ 0.008034] Disabled fast string operations
[ 0.008042] mce: CPU supports 5 MCE banks
[ 0.008052] CPU0: Thermal monitoring enabled (TM1)
[ 0.008122] SMP alternatives: switching to UP code
[ 0.010931] Freeing SMP alternatives: 16k freed
[ 0.010987] weird, boot CPU (#0) not listed by the BIOS.
[ 0.010990] SMP motherboard not detected.
[ 0.010996] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.116018] SMP disabled
[ 0.116022] Performance Events: p6 PMU driver.
[ 0.116029] ... version: 0
[ 0.116032] ... bit width: 32
[ 0.116034] ... generic registers: 2
[ 0.116037] ... value mask: 00000000ffffffff
[ 0.116040] ... max period: 000000007fffffff
[ 0.116043] ... fixed-purpose events: 0
[ 0.116045] ... event mask: 0000000000000003
[ 0.128034] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.128075] Brought up 1 CPUs
[ 0.128078] Total of 1 processors activated (3466.46 BogoMIPS).
[ 0.128251] devtmpfs: initialized
[ 0.128729] dummy:
[ 0.128803] NET: Registered protocol family 16
[ 0.130307] PCI: PCI BIOS revision 3.00 entry at 0xfaec0, last bus=4
[ 0.130311] PCI: Using configuration type 1 for base access
[ 0.131166] bio: create slab <bio-0> at 0
[ 0.131267] ACPI: Interpreter disabled.
[ 0.131326] vgaarb: loaded
[ 0.131366] PCI: Probing PCI hardware
[ 0.131369] PCI: Probing PCI hardware (bus 00)
[ 0.131372] PCI: root bus 00: using default resources
[ 0.131412] PCI host bridge to bus 0000:00
[ 0.131417] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.131421] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.131437] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.131488] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.131502] pci 0000:00:02.0: reg 10: [mem 0xdff00000-0xdff7ffff]
[ 0.131510] pci 0000:00:02.0: reg 14: [io 0xff00-0xff07]
[ 0.131519] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.131527] pci 0000:00:02.0: reg 1c: [mem 0xdff80000-0xdffbffff]
[ 0.131566] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.131578] pci 0000:00:02.1: reg 10: [mem 0xdfe80000-0xdfefffff]
[ 0.131662] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.131725] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.131754] pci 0000:00:1c.1: [8086:2662] type 01 class 0x060400
[ 0.131816] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.131845] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.131890] pci 0000:00:1d.0: reg 20: [io 0xfe00-0xfe1f]
[ 0.131926] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.131972] pci 0000:00:1d.1: reg 20: [io 0xfd00-0xfd1f]
[ 0.132021] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.132067] pci 0000:00:1d.2: reg 20: [io 0xfc00-0xfc1f]
[ 0.132102] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.132147] pci 0000:00:1d.3: reg 20: [io 0xfb00-0xfb1f]
[ 0.132189] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.132209] pci 0000:00:1d.7: reg 10: [mem 0xdffff000-0xdffff3ff]
[ 0.132281] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.132303] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.132363] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.132451] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.132465] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0800-087f
[ 0.132470] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f
[ 0.132488] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.132504] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.132515] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.132527] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.132538] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.132549] pci 0000:00:1f.1: reg 20: [io 0xf800-0xf80f]
[ 0.132588] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.132644] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.132722] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.132728] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.132734] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.132742] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
[ 0.132817] pci 0000:02:00.0: [10b5:8112] type 01 class 0x060400
[ 0.132938] pci 0000:02:00.0: supports D1
[ 0.132942] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.132972] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.132987] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.132993] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.132999] pci 0000:00:1c.1: bridge window [mem 0xdf900000-0xdf9fffff]
[ 0.133007] pci 0000:00:1c.1: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.133115] pci 0000:03:00.0: [10b5:9030] type 00 class 0x068000
[ 0.133151] pci 0000:03:00.0: reg 10: [mem 0xdf9ff000-0xdf9ff07f]
[ 0.133172] pci 0000:03:00.0: reg 14: [io 0xbf00-0xbf7f]
[ 0.133193] pci 0000:03:00.0: reg 18: [io 0xbc00-0xbcff]
[ 0.133214] pci 0000:03:00.0: reg 1c: [io 0xba00-0xbaff]
[ 0.133235] pci 0000:03:00.0: reg 20: [mem 0xdf9e0000-0xdf9effff]
[ 0.133256] pci 0000:03:00.0: reg 24: [mem 0xdf9d0000-0xdf9dffff]
[ 0.133395] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.133403] pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
[ 0.133412] pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdf9fffff]
[ 0.133420] pci 0000:02:00.0: bridge window [mem 0xdf800000-0xdf8fffff pref]
[ 0.133480] pci 0000:04:08.0: [8086:1065] type 00 class 0x020000
[ 0.133500] pci 0000:04:08.0: reg 10: [mem 0xdfcff000-0xdfcfffff]
[ 0.133512] pci 0000:04:08.0: reg 14: [io 0xdf00-0xdf3f]
[ 0.133577] pci 0000:04:08.0: supports D1 D2
[ 0.133580] pci 0000:04:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.133621] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.133627] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.133633] pci 0000:00:1e.0: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.133641] pci 0000:00:1e.0: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.133645] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.133649] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.133726] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.134415] PCI: pci_cache_line_size set to 64 bytes
[ 0.134494] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.134499] reserve RAM buffer: 000000003f6f0000 - 000000003fffffff
[ 0.134817] hpet clockevent registered
[ 0.134824] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.134833] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.136035] Switching to clocksource hpet
[ 0.136089] pnp: PnP ACPI: disabled
[ 0.136094] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.136102] PnPBIOS: Found PnP BIOS installation structure at 0xc00fba80
[ 0.136107] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbab0, dseg 0xf0000
[ 0.136144] pnp 00:00: [irq 2]
[ 0.136148] pnp 00:00: [io 0x0020-0x0021]
[ 0.136151] pnp 00:00: [io 0x00a0-0x00a1]
[ 0.136178] pnp 00:00: Plug and Play BIOS device, IDs PNP0000 (active)
[ 0.136188] pnp 00:01: [dma 4]
[ 0.136192] pnp 00:01: [io 0x0000-0x000f]
[ 0.136195] pnp 00:01: [io 0x0081-0x0083]
[ 0.136199] pnp 00:01: [io 0x0087]
[ 0.136202] pnp 00:01: [io 0x0089-0x008b]
[ 0.136205] pnp 00:01: [io 0x008f-0x0091]
[ 0.136209] pnp 00:01: [io 0x00c0-0x00df]
[ 0.136235] pnp 00:01: Plug and Play BIOS device, IDs PNP0200 (active)
[ 0.136246] pnp 00:02: [irq 0]
[ 0.136249] pnp 00:02: [io 0x0040-0x0043]
[ 0.136273] pnp 00:02: Plug and Play BIOS device, IDs PNP0100 (active)
[ 0.136284] pnp 00:03: [irq 8]
[ 0.136288] pnp 00:03: [io 0x0070-0x0071]
[ 0.136311] pnp 00:03: Plug and Play BIOS device, IDs PNP0b00 (active)
[ 0.136321] pnp 00:04: [irq 1]
[ 0.136324] pnp 00:04: [io 0x0060]
[ 0.136327] pnp 00:04: [io 0x0064]
[ 0.136353] pnp 00:04: Plug and Play BIOS device, IDs PNP0303 (active)
[ 0.136362] pnp 00:05: [io 0x0061]
[ 0.136386] pnp 00:05: Plug and Play BIOS device, IDs PNP0800 (active)
[ 0.136399] pnp 00:06: [irq 13]
[ 0.136402] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.136426] pnp 00:06: Plug and Play BIOS device, IDs PNP0c04 (active)
[ 0.136436] pnp 00:07: [mem 0xffb80000-0xffbfffff]
[ 0.136460] pnp 00:07: Plug and Play BIOS device, IDs INT0800 (active)
[ 0.136470] pnp 00:08: [mem 0x00000000-0x0009ffff]
[ 0.136474] pnp 00:08: [mem 0xffb00000-0xffb7ffff]
[ 0.136477] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.136481] pnp 00:08: [mem 0xfec00000-0xfec0ffff]
[ 0.136484] pnp 00:08: [mem 0xfee00000-0xfee0ffff]
[ 0.136488] pnp 00:08: [mem 0x00100000-0x00ffffff]
[ 0.136537] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.136543] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.136547] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.136552] system 00:08: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.136557] system 00:08: [mem 0xfee00000-0xfee0ffff] could not be reserved
[ 0.136562] system 00:08: [mem 0x00100000-0x00ffffff] could not be reserved
[ 0.136567] system 00:08: Plug and Play BIOS device, IDs PNP0c01 (active)
[ 0.136578] pnp 00:09: [mem 0x000e0000-0x000effff]
[ 0.136581] pnp 00:09: [mem 0x000f0000-0x000f3fff]
[ 0.136585] pnp 00:09: [mem 0x000f4000-0x000f7fff]
[ 0.136588] pnp 00:09: [mem 0x000f8000-0x000fffff]
[ 0.136592] pnp 00:09: [mem 0x000cf400-0x000cffff]
[ 0.136637] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[ 0.136641] system 00:09: [mem 0x000f0000-0x000f3fff] could not be reserved
[ 0.136646] system 00:09: [mem 0x000f4000-0x000f7fff] could not be reserved
[ 0.136651] system 00:09: [mem 0x000f8000-0x000fffff] could not be reserved
[ 0.136656] system 00:09: [mem 0x000cf400-0x000cffff] has been reserved
[ 0.136660] system 00:09: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 0.136672] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.136676] pnp 00:0a: [io 0x0cf8-0x0cff]
[ 0.136679] pnp 00:0a: [io 0x0400-0x04bf]
[ 0.136703] pnp 00:0a: Plug and Play BIOS device, IDs PNP0a03 (active)
[ 0.136713] pnp 00:0c: [io 0x03f0-0x03f1]
[ 0.136756] system 00:0c: [io 0x03f0-0x03f1] has been reserved
[ 0.136761] system 00:0c: Plug and Play BIOS device, IDs PNP0c02 (active)
[ 0.136768] PnPBIOS: 12 nodes reported by PnP BIOS; 12 recorded by driver
[ 0.139145] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.139151] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.139158] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.139158] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfafffff 64bit pref]
[ 0.139158] pci 0000:02:00.0: PCI bridge to [bus 03-03]
[ 0.139163] pci 0000:02:00.0: bridge window [io 0xb000-0xbfff]
[ 0.139173] pci 0000:02:00.0: bridge window [mem 0xdf900000-0xdf9fffff]
[ 0.139182] pci 0000:02:00.0: bridge window [mem 0xdf800000-0xdf8fffff pref]
[ 0.139195] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.139199] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.139206] pci 0000:00:1c.1: bridge window [mem 0xdf900000-0xdf9fffff]
[ 0.139212] pci 0000:00:1c.1: bridge window [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.139220] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.139224] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.139231] pci 0000:00:1e.0: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.139237] pci 0000:00:1e.0: bridge window [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.139275] pci 0000:00:1e.0: setting latency timer to 64
[ 0.139280] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.139284] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.139288] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.139292] pci_bus 0000:01: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.139296] pci_bus 0000:01: resource 2 [mem 0xdfa00000-0xdfafffff 64bit pref]
[ 0.139300] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.139304] pci_bus 0000:02: resource 1 [mem 0xdf900000-0xdf9fffff]
[ 0.139308] pci_bus 0000:02: resource 2 [mem 0xdf800000-0xdf8fffff 64bit pref]
[ 0.139312] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 0.139316] pci_bus 0000:03: resource 1 [mem 0xdf900000-0xdf9fffff]
[ 0.139320] pci_bus 0000:03: resource 2 [mem 0xdf800000-0xdf8fffff pref]
[ 0.139324] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.139328] pci_bus 0000:04: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.139332] pci_bus 0000:04: resource 2 [mem 0xdfb00000-0xdfbfffff 64bit pref]
[ 0.139336] pci_bus 0000:04: resource 4 [io 0x0000-0xffff]
[ 0.139340] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[ 0.139419] NET: Registered protocol family 2
[ 0.139499] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.139720] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.140519] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.140989] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.140993] TCP: reno registered
[ 0.141000] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.141018] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.141173] NET: Registered protocol family 1
[ 0.141200] pci 0000:00:02.0: Boot video device
[ 0.141360] pci 0000:04:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.141367] PCI: CLS 32 bytes, default 64
[ 0.141445] Unpacking initramfs...
[ 0.574169] Freeing initrd memory: 14212k freed
[ 0.587005] audit: initializing netlink socket (disabled)
[ 0.587029] type=2000 audit(1414292137.584:1): initialized
[ 0.603232] highmem bounce pool size: 64 pages
[ 0.603241] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.603427] VFS: Disk quotas dquot_6.5.2
[ 0.603460] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.603567] msgmni has been set to 1742
[ 0.603788] alg: No test for stdrng (krng)
[ 0.603820] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.603826] io scheduler noop registered
[ 0.603829] io scheduler deadline registered
[ 0.603848] io scheduler cfq registered (default)
[ 0.604146] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.604153] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.604169] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.604172] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.604176] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.604181] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.604191] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.604218] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.604221] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.604396] isapnp: Scanning for PnP cards...
[ 0.957509] isapnp: No Plug & Play device found
[ 0.957570] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.958094] Linux agpgart interface v0.103
[ 0.958204] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 0.958257] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.959101] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.959237] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.959420] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 0.959423] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.960115] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.960239] mousedev: PS/2 mouse device common for all mice
[ 0.960404] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.960427] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.960610] TCP: cubic registered
[ 0.960666] NET: Registered protocol family 10
[ 0.960966] Mobile IPv6
[ 0.960970] NET: Registered protocol family 17
[ 0.960978] Registering the dns_resolver key type
[ 0.961055] Using IPI No-Shortcut mode
[ 0.961163] PM: Hibernation image not present or could not be loaded.
[ 0.961181] registered taskstats version 1
[ 0.961492] rtc_cmos 00:03: setting system clock to 2014-10-26 02:55:38 UTC (1414292138)
[ 0.961599] Freeing unused kernel memory: 416k freed
[ 0.961847] Write protecting the kernel text: 3496k
[ 0.961875] Write protecting the kernel read-only data: 984k
[ 0.978991] udevd[46]: starting version 175
[ 0.981650] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.006923] usbcore: registered new interface driver usbfs
[ 1.006959] usbcore: registered new interface driver hub
[ 1.010926] SCSI subsystem initialized
[ 1.053660] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 1.055094] usbcore: registered new device driver usb
[ 1.056507] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.056584] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.056590] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.056624] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.060956] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.060960] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.064396] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.068229] libata version 3.00 loaded.
[ 1.081106] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.081125] ehci_hcd 0000:00:1d.7: irq 4, io mem 0xdffff000
[ 1.092120] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.092190] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.092194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.092198] usb usb1: Product: EHCI Host Controller
[ 1.092202] usb usb1: Manufacturer: Linux 3.4-9-rtai-686-pae ehci_hcd
[ 1.092205] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.092380] hub 1-0:1.0: USB hub found
[ 1.092388] hub 1-0:1.0: 8 ports detected
[ 1.093039] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.093044] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.093057] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.093088] uhci_hcd 0000:00:1d.0: irq 4, io base 0x0000fe00
[ 1.093135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.093139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.093143] usb usb2: Product: UHCI Host Controller
[ 1.093146] usb usb2: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd
[ 1.093149] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.093407] hub 2-0:1.0: USB hub found
[ 1.093414] hub 2-0:1.0: 2 ports detected
[ 1.093527] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.093532] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.093544] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.093572] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000fd00
[ 1.093620] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.093624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.093628] usb usb3: Product: UHCI Host Controller
[ 1.093631] usb usb3: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd
[ 1.093635] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.093774] hub 3-0:1.0: USB hub found
[ 1.093781] hub 3-0:1.0: 2 ports detected
[ 1.093886] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.093891] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.093901] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.093929] uhci_hcd 0000:00:1d.2: irq 3, io base 0x0000fc00
[ 1.093977] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.093982] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.093985] usb usb4: Product: UHCI Host Controller
[ 1.093988] usb usb4: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd
[ 1.093992] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.094127] hub 4-0:1.0: USB hub found
[ 1.094134] hub 4-0:1.0: 2 ports detected
[ 1.094233] ata_piix 0000:00:1f.1: version 2.13
[ 1.094283] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.097720] scsi0 : ata_piix
[ 1.100021] scsi1 : ata_piix
[ 1.100091] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
[ 1.100096] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
[ 1.100287] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.100292] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.100305] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.100334] uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000fb00
[ 1.100384] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.100388] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.100392] usb usb5: Product: UHCI Host Controller
[ 1.100396] usb usb5: Manufacturer: Linux 3.4-9-rtai-686-pae uhci_hcd
[ 1.100400] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.100545] hub 5-0:1.0: USB hub found
[ 1.100551] hub 5-0:1.0: 2 ports detected
[ 1.120541] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.134277] e100 0000:04:08.0: eth0: addr 0xdfcff000, irq 10, MAC addr 00:03:2d:08:d2:f8
[ 1.267298] ata1.00: ATA-6: TOSHIBA MK4025GAS, KA100A, max UDMA/100
[ 1.267304] ata1.00: 78140160 sectors, multi 16: LBA
[ 1.272277] ata1.00: configured for UDMA/100
[ 1.272430] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4025GA KA10 PQ: 0 ANSI: 5
[ 1.289931] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.290012] sd 0:0:0:0: [sda] Write Protect is off
[ 1.290017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.290051] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.374466] sda: sda1 sda2 < sda5 >
[ 1.374846] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.377455] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.588028] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.596019] Refined TSC clocksource calibration: 1733.136 MHz.
[ 1.596027] Switching to clocksource tsc
[ 1.776227] usb 2-2: New USB device found, idVendor=04d9, idProduct=048e
[ 1.776233] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.819501] input: HID 04d9:048e as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input1
[ 1.819677] generic-usb 0003:04D9:048E.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:1d.0-2/input0
[ 1.819874] usbcore: registered new interface driver usbhid
[ 1.819878] usbhid: USB HID core driver
[ 6.794246] PM: Starting manual resume from disk
[ 6.794252] PM: Hibernation image partition 8:5 present
[ 6.794255] PM: Looking for hibernation image.
[ 6.794470] PM: Image not found (code -22)
[ 6.794473] PM: Hibernation image not present or could not be loaded.
[ 6.887722] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.565507] udevd[284]: starting version 175
[ 10.112552] intel_rng: FWH not detected
[ 10.394911] ACPI Exception: AE_BAD_PARAMETER, Thread 4122341952 could not acquire Mutex [0x1] (20120320/utmutex-276)
[ 10.437960] iTCO_vendor_support: vendor-support=0
[ 10.630145] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.630802] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 10.630899] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0460)
[ 10.630961] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.955791] [drm] Initialized drm 1.1.0 20060810
[ 13.326745] Adding 1633276k swap on /dev/sda5. Priority:-1 extents:1 across:1633276k
[ 13.341961] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 13.576641] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 13.791465] loop: module loaded
[ 15.519132] RPC: Registered named UNIX socket transport module.
[ 15.519137] RPC: Registered udp transport module.
[ 15.519140] RPC: Registered tcp transport module.
[ 15.519143] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.563777] FS-Cache: Loaded
[ 15.595567] NFS: Registering the id_resolver key type
[ 15.595598] FS-Cache: Netfs 'nfs' registered for caching
[ 15.660648] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.846289] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input2
[ 20.227516] Bluetooth: Core ver 2.16
[ 20.227749] NET: Registered protocol family 31
[ 20.227753] Bluetooth: HCI device and connection manager initialized
[ 20.227756] Bluetooth: HCI socket layer initialized
[ 20.227759] Bluetooth: L2CAP socket layer initialized
[ 20.227766] Bluetooth: SCO socket layer initialized
[ 20.288736] Bluetooth: RFCOMM TTY layer initialized
[ 20.288744] Bluetooth: RFCOMM socket layer initialized
[ 20.288747] Bluetooth: RFCOMM ver 1.11
[ 20.356097] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.356102] Bluetooth: BNEP filters: protocol multicast
[ 20.720358] lp: driver loaded but no devices found
[ 20.768590] ppdev: user-space parallel port driver
[ 23.989924] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.100894] mtrr: base(0xc0000000) is not aligned on a size(0x7b0000) boundary
[ 54.971145] I-pipe: head domain RTAI registered.
[ 54.971154] RTAI[hal]: compiled with gcc version 4.7.2 (Debian 4.7.2-5) .
[ 54.971163] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[ 54.971168] SYSINFO: CPUs 1, LINUX APIC IRQ 2312, TIM_FREQ 8332329, CLK_FREQ 1733233000, CPU_FREQ 1733233000
[ 54.971172] RTAI_APIC_TIMER_IPI: RTAI DEFINED 2314, VECTOR 2314; LINUX_APIC_TIMER_IPI: RTAI DEFINED 2312, VECTOR 2312
[ 54.971177] TIMER NAME: lapic; VARIOUSLY FOUND APIC FREQs: 8332329, 8332329, 8297500
[ 55.216692] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 55.216728] , <uses LINUX SYSCALLs>, kstacks pool size = 524288 bytes.
[ 55.216734] RTAI[sched]: hard timer type/freq = APIC/8332329(Hz); default timing: oneshot; linear timed lists.
[ 55.216739] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 1733233000 hz.
[ 55.216743] RTAI[sched]: timer setup = 999 ns, resched latency = 2943 ns.
[ 55.288712] RTAI[math]: loaded.
[ 56.164839] hm2: loading Mesa HostMot2 driver version 0.15
[ 56.281386] hm2_pci: loading Mesa AnyIO HostMot2 driver version 0.7
[ 56.281438] hm2_pci: discovered 4i65 at 0000:03:00.0
[ 56.827332] hm2/hm2_4i65.0: Smart Serial Firmware Version 35
[ 56.885169] Board hm2_4i65.0.7i70.0.0 Hardware Mode 0 = standard
[ 56.888040] Board hm2_4i65.0.7i70.0.0 Software Mode 0 = input_only
[ 56.891388] Board hm2_4i65.0.7i70.0.0 Software Mode 1 = input_analog
[ 56.895718] Board hm2_4i65.0.7i70.0.0 Software Mode 2 = input_fieldvoltage
[ 57.031563] hm2/hm2_4i65.0: 72 I/O Pins used:
[ 57.031570] hm2/hm2_4i65.0: IO Pin 000 (P1-01): IOPort
[ 57.031574] hm2/hm2_4i65.0: IO Pin 001 (P1-03): IOPort
[ 57.031577] hm2/hm2_4i65.0: IO Pin 002 (P1-05): IOPort
[ 57.031580] hm2/hm2_4i65.0: IO Pin 003 (P1-07): IOPort
[ 57.031584] hm2/hm2_4i65.0: IO Pin 004 (P1-09): IOPort
[ 57.031587] hm2/hm2_4i65.0: IO Pin 005 (P1-11): IOPort
[ 57.031590] hm2/hm2_4i65.0: IO Pin 006 (P1-13): IOPort
[ 57.031594] hm2/hm2_4i65.0: IO Pin 007 (P1-15): IOPort
[ 57.031597] hm2/hm2_4i65.0: IO Pin 008 (P1-17): IOPort
[ 57.031600] hm2/hm2_4i65.0: IO Pin 009 (P1-19): IOPort
[ 57.031603] hm2/hm2_4i65.0: IO Pin 010 (P1-21): IOPort
[ 57.031607] hm2/hm2_4i65.0: IO Pin 011 (P1-23): IOPort
[ 57.031610] hm2/hm2_4i65.0: IO Pin 012 (P1-25): IOPort
[ 57.031613] hm2/hm2_4i65.0: IO Pin 013 (P1-27): IOPort
[ 57.031617] hm2/hm2_4i65.0: IO Pin 014 (P1-29): IOPort
[ 57.031620] hm2/hm2_4i65.0: IO Pin 015 (P1-31): IOPort
[ 57.031623] hm2/hm2_4i65.0: IO Pin 016 (P1-33): IOPort
[ 57.031627] hm2/hm2_4i65.0: IO Pin 017 (P1-35): IOPort
[ 57.031630] hm2/hm2_4i65.0: IO Pin 018 (P1-37): IOPort
[ 57.031633] hm2/hm2_4i65.0: IO Pin 019 (P1-39): IOPort
[ 57.031637] hm2/hm2_4i65.0: IO Pin 020 (P1-41): IOPort
[ 57.031640] hm2/hm2_4i65.0: IO Pin 021 (P1-43): IOPort
[ 57.031643] hm2/hm2_4i65.0: IO Pin 022 (P1-45): IOPort
[ 57.031646] hm2/hm2_4i65.0: IO Pin 023 (P1-47): IOPort
[ 57.031650] hm2/hm2_4i65.0: IO Pin 024 (P3-01): IOPort
[ 57.031653] hm2/hm2_4i65.0: IO Pin 025 (P3-03): IOPort
[ 57.031656] hm2/hm2_4i65.0: IO Pin 026 (P3-05): IOPort
[ 57.031660] hm2/hm2_4i65.0: IO Pin 027 (P3-07): IOPort
[ 57.031663] hm2/hm2_4i65.0: IO Pin 028 (P3-09): IOPort
[ 57.031666] hm2/hm2_4i65.0: IO Pin 029 (P3-11): IOPort
[ 57.031670] hm2/hm2_4i65.0: IO Pin 030 (P3-13): IOPort
[ 57.031673] hm2/hm2_4i65.0: IO Pin 031 (P3-15): IOPort
[ 57.031676] hm2/hm2_4i65.0: IO Pin 032 (P3-17): IOPort
[ 57.031680] hm2/hm2_4i65.0: IO Pin 033 (P3-19): IOPort
[ 57.031683] hm2/hm2_4i65.0: IO Pin 034 (P3-21): IOPort
[ 57.031686] hm2/hm2_4i65.0: IO Pin 035 (P3-23): IOPort
[ 57.031689] hm2/hm2_4i65.0: IO Pin 036 (P3-25): IOPort
[ 57.031693] hm2/hm2_4i65.0: IO Pin 037 (P3-27): IOPort
[ 57.031696] hm2/hm2_4i65.0: IO Pin 038 (P3-29): IOPort
[ 57.031699] hm2/hm2_4i65.0: IO Pin 039 (P3-31): IOPort
[ 57.031703] hm2/hm2_4i65.0: IO Pin 040 (P3-33): IOPort
[ 57.031706] hm2/hm2_4i65.0: IO Pin 041 (P3-35): IOPort
[ 57.031709] hm2/hm2_4i65.0: IO Pin 042 (P3-37): IOPort
[ 57.031712] hm2/hm2_4i65.0: IO Pin 043 (P3-39): IOPort
[ 57.031716] hm2/hm2_4i65.0: IO Pin 044 (P3-41): IOPort
[ 57.031719] hm2/hm2_4i65.0: IO Pin 045 (P3-43): IOPort
[ 57.031722] hm2/hm2_4i65.0: IO Pin 046 (P3-45): IOPort
[ 57.031726] hm2/hm2_4i65.0: IO Pin 047 (P3-47): IOPort
[ 57.031730] hm2/hm2_4i65.0: IO Pin 048 (P4-01): Smart Serial Interface #0, pin RxData0 (Input)
[ 57.031734] hm2/hm2_4i65.0: IO Pin 049 (P4-03): IOPort
[ 57.031738] hm2/hm2_4i65.0: IO Pin 050 (P4-05): IOPort
[ 57.031741] hm2/hm2_4i65.0: IO Pin 051 (P4-07): IOPort
[ 57.031746] hm2/hm2_4i65.0: IO Pin 052 (P4-09): Smart Serial Interface #0, pin TxData0 (Output)
[ 57.031750] hm2/hm2_4i65.0: IO Pin 053 (P4-11): Smart Serial Interface #0, pin TxEn0 (Output)
[ 57.031754] hm2/hm2_4i65.0: IO Pin 054 (P4-13): IOPort
[ 57.031758] hm2/hm2_4i65.0: IO Pin 055 (P4-15): IOPort
[ 57.031761] hm2/hm2_4i65.0: IO Pin 056 (P4-17): IOPort
[ 57.031764] hm2/hm2_4i65.0: IO Pin 057 (P4-19): IOPort
[ 57.031768] hm2/hm2_4i65.0: IO Pin 058 (P4-21): IOPort
[ 57.031771] hm2/hm2_4i65.0: IO Pin 059 (P4-23): IOPort
[ 57.031774] hm2/hm2_4i65.0: IO Pin 060 (P4-25): IOPort
[ 57.031778] hm2/hm2_4i65.0: IO Pin 061 (P4-27): IOPort
[ 57.031781] hm2/hm2_4i65.0: IO Pin 062 (P4-29): IOPort
[ 57.031784] hm2/hm2_4i65.0: IO Pin 063 (P4-31): IOPort
[ 57.031788] hm2/hm2_4i65.0: IO Pin 064 (P4-33): IOPort
[ 57.031791] hm2/hm2_4i65.0: IO Pin 065 (P4-35): IOPort
[ 57.031794] hm2/hm2_4i65.0: IO Pin 066 (P4-37): IOPort
[ 57.031797] hm2/hm2_4i65.0: IO Pin 067 (P4-39): IOPort
[ 57.031801] hm2/hm2_4i65.0: IO Pin 068 (P4-41): IOPort
[ 57.031804] hm2/hm2_4i65.0: IO Pin 069 (P4-43): IOPort
[ 57.031807] hm2/hm2_4i65.0: IO Pin 070 (P4-45): IOPort
[ 57.031811] hm2/hm2_4i65.0: IO Pin 071 (P4-47): IOPort
[ 57.031908] hm2/hm2_4i65.0: registered
[ 57.031912] hm2_4i65.0: initialized AnyIO board at 0000:03:00.0
[ 72.721723]
[ 72.721726] In recent history there were
[ 72.721727] 1732960, 1733111, 1733048, 1732999, and 1733152
[ 72.721729] elapsed clocks between calls to the motion controller.
[ 72.721735] This time, there were 26749013 which is so anomalously
[ 72.721737] large that it probably signifies a problem with your
[ 72.721738] realtime configuration. For the rest of this run of
[ 72.721740] EMC, this message will be suppressed.
[ 72.721741]
[ 72.721745] RTAPI: ERROR: Unexpected realtime delay on task 1
[ 72.721746] This Message will only display once per session.
[ 72.721747] Run the Latency Test and resolve before continuing.
[ 72.721751] hm2/hm2_4i65.0: Watchdog has bit! (set the .has-bit pin to False to resume)
[ 72.723700] hm2/hm2_4i65.0: Smart Serial port 0: DoIt not cleared from previous servo thread. Servo thread rate probably too fast. This message will not be repeated, but the hm2_4i65.0.sserial.0.fault-count pin will indicate if this is happening frequently.
[ 72.741701] hm2/hm2_4i65.0: Smart Serial Comms Error: There have been more than 1 errors in 10 thread executions at least 200 times. See other error messages for details.
[ 72.741707] hm2/hm2_4i65.0: ***Smart Serial Port 0 will be stopped***
user@cnc:~$The error linuxcnc reports is:
RTAPI: ERROR Unexpected Realtime delay on task 1
This message will only display once per session.
Run the latency Test and resolve before continuing
hm2/hm2_4i65.0 : Smart Serial Port 0 : DoIt not cleared from previous servo thread.
Servo thread rate probably too fast.
THis message will not be repeated , but the hm2_4i65.0.sserial.0.fault -count pin will indicate if this is happening frequently
hm2/hm2_4i65.0: Smart Serial Comms Error:
There have been more than 1 errors in 10 thread executions at least 200 times
See other error messages for details
hm2/hm2_4i65.0: ***Smart Serial Port 0 will be stopped***maybe someone can help
Please Log in or Create an account to join the conversation.
30 Sep 2014 16:29 #51680
by hardware_crash
Replied by hardware_crash on topic Mesa 4i65 Realtime delay in task 1
Dear PCW ,
a very strange thing is that it realy seems that the cpu stops for a moment as the mouse often get stuck while moving on the desktop
(Mainboard : MB896IL )
I also noticed that when I set the servo thread rate in the ini file to 10000 and start linuxcnc the system freezes :/
I tried to disable all power management and smi settings but that didnt change anything.
I also tried with a few other mainboards as an Compaq an asus p4b800 and a intel d525mw all with disabled hyperthread, disabled power management, disabled apic and acpi.
The results didnt change : after about 60 sec the 4i65 stops with the known errors
a very strange thing is that it realy seems that the cpu stops for a moment as the mouse often get stuck while moving on the desktop
(Mainboard : MB896IL )I also noticed that when I set the servo thread rate in the ini file to 10000 and start linuxcnc the system freezes :/
I tried to disable all power management and smi settings but that didnt change anything.
I also tried with a few other mainboards as an Compaq an asus p4b800 and a intel d525mw all with disabled hyperthread, disabled power management, disabled apic and acpi.
The results didnt change : after about 60 sec the 4i65 stops with the known errors
Please Log in or Create an account to join the conversation.
02 Oct 2014 16:58 - 02 Oct 2014 18:18 #51727
by hardware_crash
Replied by hardware_crash on topic Mesa 4i65 Realtime delay in task 1
dear ArcExe,
Okay that are bad news :/
I will give it a try and if that does not work i will return it
EDIT: So I also ordered an ASRock E350M1 board for testing maybe I will start a little linuxcnc mainboard check
Okay that are bad news :/
I will give it a try and if that does not work i will return it
EDIT: So I also ordered an ASRock E350M1 board for testing maybe I will start a little linuxcnc mainboard check
Please Log in or Create an account to join the conversation.
02 Oct 2014 18:36 #51728
by ArcEye
2 entries for that board, both good results, especially if you are only using a servo thread, so hopefully that will be fine
regards
Replied by ArcEye on topic Mesa 4i65 Realtime delay in task 1
EDIT: So I also ordered an ASRock E350M1 board for testing maybe I will start a little linuxcnc mainboard check
2 entries for that board, both good results, especially if you are only using a servo thread, so hopefully that will be fine
regards
Please Log in or Create an account to join the conversation.
Time to create page: 1.045 seconds