Home all not working
05 Jun 2018 04:18 #111645
by thadwald
Home all not working was created by thadwald
Today I configured the homing process on my engraver retrofit. Homing each individual axis works now. The home all button doesn’t work, however. I do have a HOME_SEQUENCE = n line under each [axis] section. What else can I check?
Please Log in or Create an account to join the conversation.
06 Jun 2018 09:47 #111732
by andypugh
Replied by andypugh on topic Home all not working
Do the home sequence numbers start at 0 and have no gaps? (I think this might be a requirement in 2.8, I can't recall if it was in 2.7)
Please Log in or Create an account to join the conversation.
06 Jun 2018 15:03 #111761
by thadwald
Yes. Specifically, I want it to raise z first (home is up), then home x and y simultaneously. So I have HOME_SEQUENCE = 0 under the z axis section, and HOME_SEQUENCE = 1 under both x and y.
Is there a way to debug or trace what happens when I press the <home all> button?
Replied by thadwald on topic Home all not working
Do the home sequence numbers start at 0 and have no gaps?
Yes. Specifically, I want it to raise z first (home is up), then home x and y simultaneously. So I have HOME_SEQUENCE = 0 under the z axis section, and HOME_SEQUENCE = 1 under both x and y.
Is there a way to debug or trace what happens when I press the <home all> button?
Please Log in or Create an account to join the conversation.
07 Jun 2018 16:13 #111894
by andypugh
Replied by andypugh on topic Home all not working
Which GUI are you using? As far as I know Axis only displays the home-all button if it believes the homing config to be correct.
Which LinuxCNC version?
Which LinuxCNC version?
Please Log in or Create an account to join the conversation.
07 Jun 2018 19:46 #111928
by thadwald
Replied by thadwald on topic Home all not working
I am running LinuxCNC 2.8 and the gmoccapy UI. The home all button has always been available.
Please Log in or Create an account to join the conversation.
07 Jun 2018 23:09 #111949
by andypugh
Replied by andypugh on topic Home all not working
You can have a look at the joint.N.homing-state to see if anything is happening there.
Please Log in or Create an account to join the conversation.
07 Jun 2018 23:56 #111954
by rodw
Replied by rodw on topic Home all not working
In your ini file I think you havechange it to
This is something in gmocappy that Norbert fixed on a bug report from me.
KINEMATICS = trivkins coordinates=XYYZ kinstype=BOTHKINEMATICS = trivkins coordinates=XYYZThis is something in gmocappy that Norbert fixed on a bug report from me.
Please Log in or Create an account to join the conversation.
08 Jun 2018 19:44 #112017
by thadwald
Replied by thadwald on topic Home all not working
The joint.N.homing-state is a number that seems to change whenever the homing sequence is underway. Pressing Home All does not make it change.
In my ini file the KINEMATICS line is
I have one motor on each axis. I tried changing this line to
It made no difference
In my ini file the KINEMATICS line is
KINEMATICS = trivkinsI have one motor on each axis. I tried changing this line to
KINEMATICS = trivkins coordinates=XYZIt made no difference
Please Log in or Create an account to join the conversation.
08 Jun 2018 23:44 #112031
by rodw
Replied by rodw on topic Home all not working
Leave the coordinates= in there. Its required as it tells Linuxcnc V2.8 which joint aligns with which axis.
Please Log in or Create an account to join the conversation.
18 Jun 2018 02:13 #112517
by thadwald
Replied by thadwald on topic Home all not working
I've also tried this in Axis. the "Home All" button is not available.
I have attached my .ini file. Could someone please take a look at it and see if anything is configured incorrectly for the Home All sequence to work?
Thanks.
I have attached my .ini file. Could someone please take a look at it and see if anything is configured incorrectly for the Home All sequence to work?
Thanks.
Please Log in or Create an account to join the conversation.
Time to create page: 0.140 seconds