Destination Host Unreachable
- xlordofpainx
- Offline
- Junior Member
-
Less
More
- Posts: 35
- Thank you received: 5
20 Oct 2022 15:47 #254612
by xlordofpainx
Replied by xlordofpainx on topic Destination Host Unreachable
So. I span it and it does actually go back. Very cool. Lets see what else could have gone wrong.
Sorry for posting it as a separate question. Figured it would be more productive to have this question as a separate one.
Sorry for posting it as a separate question. Figured it would be more productive to have this question as a separate one.
Please Log in or Create an account to join the conversation.
- xlordofpainx
- Offline
- Junior Member
-
Less
More
- Posts: 35
- Thank you received: 5
20 Oct 2022 15:51 #254613
by xlordofpainx
Replied by xlordofpainx on topic Destination Host Unreachable
What would the single-ended wiring accomplish? So Pulse and direction+ would always be pulled high. and basically, the motor would be the only controller from Step- and Dir-?
Please Log in or Create an account to join the conversation.
20 Oct 2022 20:37 #254630
by PCW
Replied by PCW on topic Destination Host Unreachable
Single ended (PUL+ and DIR+ = 5V) wiring has higher drive
capabilities (since there is only one driver output resistance
in the circuit instead of two)
Differential wiring is more suitable for servo drives with high
frequency (up to MHz) line receiver inputs.
capabilities (since there is only one driver output resistance
in the circuit instead of two)
Differential wiring is more suitable for servo drives with high
frequency (up to MHz) line receiver inputs.
Please Log in or Create an account to join the conversation.
Time to create page: 0.122 seconds