sticky estop, help needed

Hi everyone, i have tried entering some older threads but to no avail. I have currently a very strange behaviour to deal with. I´ve tried each and every logic to get my system to reset halui.estop.is-activated and have resorted to a very basic.hal that does nothing but try to reset emc-state 3 (estop reset). I even built a python logger skript that can log emc-state and all hal pins, but no matter what i try, i can´t reset estop.
Are there any hidden inputs into system estop? I´ve been looking into github to track all connections to emc-state, but i found nothing revealing but this is way above my paygrade anyhow. 
All help is very much appreciated, i am close to being crazy, doing the same thing over and over again
 

Hmmm...

Make a new config, see if that works (it usually does).

I think I know what you may be trying to achieve.

If you have a look at the sample as shown in the screenshot, yes it is a pyvcp panel, it should give you the logic require if using your own panel or physical button.