New CNC Mill, Expert LinuxCNC person wanted for new VMC Project.

That was the last Gantry I built it was designed to be a five axis to make tooling for large molded parts it needed to get around all sides of the tool. The new gantry pictured is a 3 axis built for the sole purpose of machine all the parts for my new smaller machine it just 3 axis but it will have 50 Plus inches of travel in the z to be able to machine the riser of the new machine.It does have 72 inches under the Bridge. On this machine the Gantry(bridge) moves and my new small machine the Table moves in the Y axis.

amazing

For your next machine, maybe something like this (attached PDF file)

"It features an X-axis travel
of 12m, a W-axis travel (vertical movement of
the cross-beam carried by the two columns) of
2.5m, a Y-axis travel (spindle movement along
the cross-beam) of 7.5m, and a ram stroke (Zaxis) of 1.5m. Moreover, with its German-built
Cytec head, this machine offers a full five-axis
simultaneous-machining capability. "

Nice Machine I am building a simpler version of a two axis head. Not as nice but much less expensive. Machine like the one you posted are amazing. I think I might need to get some help as I work alone building my small machine.

Here is one I was working on before the recession of 2008 Hit, The machine was started then canceled when the company I was building it for lost the contract they were getting the machine for. Now its just smaller machine for me. But it would have been a cool machine to build.

Like a kid in a candy shop !
Nice and big and........