EMC2 on Puppy linux.
11 Sep 2014 03:39 #51048
by dgarrett
Replied by dgarrett on topic Re:Curious for puppy too
Lucid debs are in this directory tree:
buildbot.linuxcnc.org/dists/lucid/
example subdir for 2.6-rt
buildbot.linuxcnc.org/dists/lucid/2.6-rt/
example deb:
use wget to retrieve debs
buildbot.linuxcnc.org/dists/lucid/
example subdir for 2.6-rt
buildbot.linuxcnc.org/dists/lucid/2.6-rt/
example deb:
buildbot.linuxcnc.org/dists/lucid/2.6-rt/binary-i386/linuxcnc_2.6.3.4.g1f74d9d_i386.deb
use wget to retrieve debs
The following user(s) said Thank You: vtcnc
Please Log in or Create an account to join the conversation.
11 Sep 2014 03:42 - 11 Sep 2014 03:45 #51049
by vtcnc
Replied by vtcnc on topic Re:Curious for puppy too
thanks dgarrett!
I think I can actually just add that to the Puppy package manager
I think I can actually just add that to the Puppy package manager
Last edit: 11 Sep 2014 03:45 by vtcnc.
Please Log in or Create an account to join the conversation.
11 Sep 2014 03:54 #51050
by dgarrett
Replied by dgarrett on topic Re:Curious for puppy too
i inadvertently listed the buildbot debs (see buildbot.linuxcnc.org)
The official releases are at:
linuxcnc.org/dists/lucid
The official releases are at:
linuxcnc.org/dists/lucid
The following user(s) said Thank You: vtcnc
Please Log in or Create an account to join the conversation.
11 Sep 2014 08:09 #51053
by vtcnc
Replied by vtcnc on topic Re:Curious for puppy too
Thanks again dgarrett. I tried it, but the kernel version requirement is absolute in the one I tried, and so there's no chance of an exact match with the Puppy kernel I tried -- close but not exact. Oh well. It was worth a try, and I learned a lot n the process.
Please Log in or Create an account to join the conversation.
11 Sep 2014 08:35 - 11 Sep 2014 08:39 #51055
by dgarrett
Replied by dgarrett on topic Re:Curious for puppy too
You might want to look at new work included in git master for uspace with rt-preempt kernels. Buildbot linuxcnc debs are available
wiki.linuxcnc.org/cgi-bin/wiki.pl?Uspace
wiki.linuxcnc.org/cgi-bin/wiki.pl?Uspace
Last edit: 11 Sep 2014 08:39 by dgarrett.
Please Log in or Create an account to join the conversation.
Time to create page: 0.183 seconds