Installing LinuxCNC on Debian 9

More
10 Jul 2018 18:00 - 07 Feb 2019 15:36 #113960 by BigJohnT
Here is the method I use to install LinuxCNC on Debian 9 and setup for using an Ethernet Mesa card.

gnipsel.com/linuxcnc/uspace/debian9-rt.html

gnipsel.com/linuxcnc/uspace/debian9-emc.html

gnipsel.com/linuxcnc/uspace/debian9-eth.html

I've gathered all my instructions into one place for Uspace and various OS's

gnipsel.com/linuxcnc/uspace/

JT
Last edit: 07 Feb 2019 15:36 by BigJohnT.
The following user(s) said Thank You: trilobyte, tommylight, InMyDarkestHour, rodw, ikkuh, Grotius, spma, JetForMe

Please Log in or Create an account to join the conversation.

More
11 Jul 2018 19:56 #114024 by Grotius
Hi John,

Why not cloning a pre configured debian 9 with clonezilla server? clonezilla.org/clonezilla-SE
This saves time.... I only tried the cd clonezilla, this works perfect. 15 minutes ready.
Is this an idea to use?

Please Log in or Create an account to join the conversation.

More
11 Jul 2018 22:20 #114035 by BigJohnT
I guess once you setup the drive cloning it might be a good thing.

JT

Please Log in or Create an account to join the conversation.

More
12 Jul 2018 05:20 #114044 by tommylight
Or use "SystemBack" that is very friendly and easy to use.
In some cases you have to uninstall casper and install liveboot, but otherwise it works nicely and can also make an ISO that can be booted from a USB.

Please Log in or Create an account to join the conversation.

More
04 Aug 2018 02:00 #115574 by Vitran
cdimage.debian.org/cdimage/unofficial/no....0-amd64-netinst.iso

This link you provided is only a few days old, but it is giving a 404 Not Found. Where can one find where the disk images are?

Please Log in or Create an account to join the conversation.

More
More
04 Aug 2018 12:31 #115599 by Vitran
That works, thank you. Yesterday it was providing a 404 when I copied BigJohnT's link no matter what I tried, but I was doing it on a different computer.

Please Log in or Create an account to join the conversation.

More
04 Aug 2018 15:10 #115605 by BigJohnT
I should have known better than to put the file name in the link... it will change.

JT

Please Log in or Create an account to join the conversation.

More
01 Oct 2018 11:40 #118278 by sirx
Hi admin,

please it's all right until I type this line:


lablpm@PCBCNC2:~$ sudo apt-key adv --keyserver hkp://keys.gnupg.net --recv-key 3cb9fd148f374fef
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.V8ERg2YaYv --trustdb-name /etc/apt//trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-jessie-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-jessie-security-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-jessie-stable.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-squeeze-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-squeeze-stable.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-wheezy-automatic.gpg --keyring /etc/apt/trusted.gpg.d//debian-archive-wheezy-stable.gpg --keyserver hkp://keys.gnupg.net --recv-key 3cb9fd148f374fef
gpg: requesting key 8F374FEF from hkp server keys.gnupg.net
?: keys.gnupg.net: Host not found
gpgkeys: HTTP fetch error 7: couldn't connect: No such file or directory
gpg: Non sono stati trovati dati OpenPGP validi.
gpg: Numero totale esaminato: 0
lablpm@PCBCNC2:~$

Please help me to fix the problem
best regards
sirx

Please Log in or Create an account to join the conversation.

More
21 Oct 2018 15:16 #119161 by BigJohnT
You probably skipped a step.

JT

Please Log in or Create an account to join the conversation.

Time to create page: 0.116 seconds
Powered by Kunena Forum