reboot and select proper boot device

More
16 Jul 2019 23:21 #139638 by BigJohnT
Yes, I've used clonezilla in the past but the disk copy device is simpler to use.

JT

Please Log in or Create an account to join the conversation.

More
16 Jul 2019 23:32 #139639 by Grotius
A few weeks ago i cloned 5 disks...
One was fallen at the ground. And for sure, ethercat was not working on the fallen disk.

How is the post office handling the disks? But strange, your source disk has also a problem. Is your wife angry when you are
not home?

Please Log in or Create an account to join the conversation.

More
16 Jul 2019 23:43 #139641 by BigJohnT
I assume the USPS drop kicks my packaged all the way to the destination.

I never leave home without my wife and gun...

JT
The following user(s) said Thank You: Grotius

Please Log in or Create an account to join the conversation.

More
17 Jul 2019 16:05 #139708 by BigJohnT
At John,

Did you try and boot with more than one hard drive connected at some point? I had to boot from a LiveCD and delete the partitions before the Debian 9 install CD would recognize the hard drive. Makes me think something got written to the boot section at some point... but I still have to look at my master hard drive too.

JT

Please Log in or Create an account to join the conversation.

More
17 Jul 2019 16:57 #139710 by johns00056
Yes. I started out with two hard drives in the machine.

Please Log in or Create an account to join the conversation.

More
19 Jul 2019 16:08 - 19 Jul 2019 16:09 #139897 by BigJohnT
Shipped your hard drive back today. I also added a bunch of G code generators to the menu as well as the latency histogram and a purdy desktop.



JT
Last edit: 19 Jul 2019 16:09 by BigJohnT.

Please Log in or Create an account to join the conversation.

More
23 Jul 2019 22:34 #140363 by johns00056
I got the replacement hard drive and it started right up, no problem.

Thanks for the help. I have not gotten a chance to look at the cool extra stuff.

Please Log in or Create an account to join the conversation.

Time to create page: 0.073 seconds
Powered by Kunena Forum