linuxcnc 2.8.0-buster ISO 2020 Sept. 7

partec
Offline
Elite Member

19 Sep 2020 23:27 - 19 Sep 2020 23:41 #182794 by partec

Replied by partec on topic linuxcnc 2.8.0-buster ISO 2020 Sept. 7

thanks Dmitry, that's great, maybe this mainboard is a little more practical than the ASUS J4005I-C

Last edit: 19 Sep 2020 23:41 by partec.

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

20 Sep 2020 00:11 #182796 by andypugh

Replied by andypugh on topic linuxcnc 2.8.0-buster ISO 2020 Sept. 7

tommylight wrote:

Rallinger wrote:
My question: is there a way to install and run Linuxcnc 2.8 / Debian 10 on a 32bit architecture?
Unfortunately not.

Actually, this should be possible, we do build 32-bit Buster debs.

www.linuxcnc.org/dists/buster/2.8-rtpreempt/binary-i386/

You need to install Buster, then the preempt-rt kernel, and then LinuxCNC.
linuxcnc.org/docs/2.8/html/getting-start...th_preempt_rt_kernel

(I know these instructions specifically say "amd64" throughout. I think that is an error.)

The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

20 Sep 2020 08:06 #182834 by tommylight

Replied by tommylight on topic linuxcnc 2.8.0-buster ISO 2020 Sept. 7

Hmmm i was pretty sure they all gave up on 32 bit, but apparently not, thank you Andy.
So here is the link to 32 bit Buster, the non free version with all the drivers for WiFi etc.
cdimage.debian.org/images/unofficial/non...0-live+nonfree/i386/

Please Log in or Create an account to join the conversation.

Time to create page: 0.093 seconds