when an inch isn't

tommylight
Away
Moderator

27 Jun 2024 23:31 #303941 by tommylight

Replied by tommylight on topic when an inch isn't

OP ?
Crickets...

Please Log in or Create an account to join the conversation.

cornholio
Offline
Platinum Member

28 Jun 2024 00:49 #303946 by cornholio

Replied by cornholio on topic when an inch isn't

Crickets ? A measure of lack of response ?

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

28 Jun 2024 01:28 #303949 by tommylight

Replied by tommylight on topic when an inch isn't

cornholio wrote:
Crickets ? A measure of lack of response ?

Yup !

Please Log in or Create an account to join the conversation.

Irritant
Offline
Senior Member

28 Jun 2024 17:50 #303981 by Irritant

Replied by Irritant on topic when an inch isn't

Ah yes, Bananananas. I recall someone from Aus calling them that. But, he still does a lot of work in bananas!

Please Log in or Create an account to join the conversation.

Irritant
Offline
Senior Member

28 Jun 2024 18:25 #303984 by Irritant

Replied by Irritant on topic when an inch isn't

Hi Guys, I am in Canada so we are prepared to work in any language there is, measurement included. We must remember that an inch is 25.4mm .5 is 12.7 and .250 is 6.35.

I can work in anything but I need this to measure 1" or 25.4mm.

Cheers!

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

29 Jun 2024 09:54 #304013 by andypugh

Replied by andypugh on topic when an inch isn't

Did you change the microstepping number? 1.9 just doesn't make sense.

1.016 is the ratio between 5tpi and 5mm pitch. Maybe the leadscrew isn't the pitch you think it is?

The following user(s) said Thank You: Aciera

Please Log in or Create an account to join the conversation.

Time to create page: 0.070 seconds