Linuxcnc 2.9.4 and Mesa 7i97T

OK those settings should result is a +1.0V output
(as they do here)

Possible reasons for a very different output voltage:

1. Measuring wrong pins ( analog output 0 would be measured from TB3 pin 4 to TB3 pin 3)

2. Marginal 5V supply to 7I97T

3. Problem with the voltmeter

4. Damaged 7I97T analog output driver

5. 7I97T analog output connected to shorted  load

 I think my voltage spikes seemed to disappear when I connected the board.So now im ready for the next step in my "simple retrofit machine"image missing /media/kunena/emoticons/smile.png

• only one motor standing on the table waiting for action
  • enable directly to the Rexroth DKC11.3 drive

able to jog x motor in Axis.Unfortunately it didnt workWhen starting the configuration in Linuxcnc i get the message:
Note: Using POSIX realtime2573Stopping realtime threadsUnloading hal componentsNote: Using POSIX realtimeI have tried several things but now it seems that im stuck with this message.Any ideas?I attach report, hal and ini     

File Attachment:

File Name: homagretrofit.ini
File Size:3.48 KB

File Attachment:

File Name: main.hal
File Size:2.61 KB

File Attachment:

File Name: io.hal
File Size:241 B

File Attachment:

File Name: linuxcncreport.txt
File Size:5.14 KB

You have basic7i97.hal in your .ini file but I think 
you wanted main. hal there instead.

That's why you get this error:

CANNOT FIND FILE FOR:basic7i97.hal

Thanks - of course -so simple i should have noticed it myself
Next error after changing name of hal in ini:

Debug file information:
Note: Using POSIX realtime
hm2_eth: rtapi_app_main: Resource temporarily unavailable (-11)
./main.hal:9: waitpid failed /usr/bin/rtapi_app hm2_eth
./main.hal:9: /usr/bin/rtapi_app exited without becoming ready
./main.hal:9: insmod for hm2_eth failed, returned -1
2077
Stopping realtime threads
Unloading hal components
Note: Using POSIX realtime

Why "temporarily" unavailable?
 

That typically means a connection issue

Either the link was not up when LinuxCNC started, the IP address was wrong or similar

 

In a terminal, what does
ip a
return?