Delta Servo position register.

andypugh
Offline
Moderator

07 Jan 2022 19:54 #231051 by andypugh

Replied by andypugh on topic Delta Servo position register.

    px1 = (uint16_t)(xtemp)&;(0xFFFF);
}

I just put the code in code-tags, and I think that there might be a spurious ";" in the line above.

Please Log in or Create an account to join the conversation.

medicusdkfz
Offline
Junior Member

25 Mar 2022 19:18 #238361 by medicusdkfz

Replied by medicusdkfz on topic Delta Servo position register.

Hi Serdar,

I want to use 5 ASD-A2-M servos with EtherCat (EK1100 and EL6751). Could you help me please with my setup in LinuxCNC?

Thank you,
Pierre

Reply at: pierre(at)branitzki.de

Please Log in or Create an account to join the conversation.

tommylight
Away
Moderator

25 Mar 2022 19:57 #238366 by tommylight

Replied by tommylight on topic Delta Servo position register.

Please Log in or Create an account to join the conversation.

steals2k
Offline
New Member

08 Oct 2022 19:06 #253770 by steals2k

Replied by steals2k on topic Delta Servo position register.

Hello, Markus
Can I ask u about some help with 3rd gen and linuxcnc?

Please Log in or Create an account to join the conversation.

mehdidadash
Offline
Senior Member

05 Dec 2022 07:22 #258561 by mehdidadash

Replied by mehdidadash on topic Delta Servo position register.

I am afraid that M series of Delta servos use DMCNET and you can't use them with Ethercat

Please Log in or Create an account to join the conversation.

medicusdkfz
Offline
Junior Member

05 Dec 2022 07:54 - 05 Dec 2022 08:54 #258563 by medicusdkfz

Replied by medicusdkfz on topic Delta Servo position register.

Sorry, I was wrong: Of course it‘s the E-type…

Last edit: 05 Dec 2022 08:54 by medicusdkfz.

Please Log in or Create an account to join the conversation.

Time to create page: 0.066 seconds