How to connect servo drives with Linuxcnc ?
- Sukritmt786
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 1
03 Feb 2023 08:40 #263580
by Sukritmt786
How to connect servo drives with Linuxcnc ? was created by Sukritmt786
Hi All,
I can detect slave devices from "ethercat slaves command".
But
I don't know how to connect and configure in Linuxcnc application, So that I can perform operation on Panasonic Servo drives from Linuxcnc application Through EtherCAT.
I have researched on Internet but things didn't work.
Please help me with details.
I can detect slave devices from "ethercat slaves command".
But
I don't know how to connect and configure in Linuxcnc application, So that I can perform operation on Panasonic Servo drives from Linuxcnc application Through EtherCAT.
I have researched on Internet but things didn't work.
Please help me with details.
The following user(s) said Thank You: xwq
Please Log in or Create an account to join the conversation.
03 Feb 2023 10:54 #263591
by rodw
Replied by rodw on topic How to connect servo drives with Linuxcnc ?
Follow this
forum.linuxcnc.org/ethercat/45336-etherc...-how-to-step-by-step
And please do not do multiple posts of the same topic again
forum.linuxcnc.org/ethercat/45336-etherc...-how-to-step-by-step
And please do not do multiple posts of the same topic again
Please Log in or Create an account to join the conversation.
- tommylight
-
- Away
- Moderator
-
Less
More
- Posts: 17801
- Thank you received: 5920
03 Feb 2023 13:01 #263597
by tommylight
Replied by tommylight on topic How to connect servo drives with Linuxcnc ?
@Sukritmt786,
No double posting, makes it impossible to follow what has already been answered.
No double posting, makes it impossible to follow what has already been answered.
Please Log in or Create an account to join the conversation.
- Sukritmt786
- Offline
- New Member
-
Less
More
- Posts: 3
- Thank you received: 1
08 Feb 2023 09:41 - 08 Feb 2023 09:41 #264017
by Sukritmt786
Replied by Sukritmt786 on topic How to connect servo drives with Linuxcnc ?
I had tried this but it doesn't work.
Last edit: 08 Feb 2023 09:41 by Sukritmt786.
Please Log in or Create an account to join the conversation.
09 Feb 2023 22:26 #264173
by andypugh
Replied by andypugh on topic How to connect servo drives with Linuxcnc ?
Do you see any error messages?
Exactly what doesn't work?
Exactly what doesn't work?
Please Log in or Create an account to join the conversation.
Time to create page: 0.087 seconds