Advanced Search

Sorry, I am using version 2.9.3.

and uname -srm:
Linux 6.1.0-30-rt-amd64 x86_64

 

Please provide more info.

What version of LinuxCNC are you running?

Potentially post output of uname -srm

Post a picture or two.

Just some sort of info.

ok, works also on the 7c81 ports

It may be that the Fujitsu Mini PC (like many laptops) has some
built-in power management that cannot be disabled.

 

Hello,

@LCR
Did you manage to solve the problem of offset a different way than the integration loop ? I have the exact same problem, and I am stuck when using csp mode 

I have everything working, some of it is AI coded, but I also made an installation guide on how I did it. 
github.com/KlaKalma/Ma_CNC

Here is the repo, for those who want it. 
This LC10E drive seems quite hard to use....

When I use CSV tho, it's working super well. I have a custom-made PID tuner, that automatically tunes the PID for the position. It's on the git. I have a few microns of error as well.
 

 

I did a

In fairness, you did say "take your time" .  I honestly didn't realize it has been since April that we talked about this.

I have a ~75% diff created.  I will try to make time to see this to completion in the coming days.  I'll take a look at what you've provided and no doubt merge it with what I've got and it'll be a nice little collaboration. 

Thank you for providing what you did, I will let you know when I've committed everything!

Hi,
habe den aktuellen PP angepasst, und die Bohrzyklen G81, G83 hinzugefügt.
Bei mir funktioniert dieser sehr gut, bitte aber bei dir an der Maschine genau prüfen.

Could you could use some Halui MDI commands?

'P0' will set the currently active offsets, while 'P1','P2' ... will set the values of a particular offset system.
You could also stay in G54 and use different G52 offsets.

Wenn es bereits läuft, ist es natürlich wurscht.
Ich suche eher was fürs Bedienpanel und die Aliexpresskarte schien mir brauchbar. Habe sogar ein PDF bekommen, wo was zur Einrichtung steht, aber nichts von einem Bitfile o.Ä.
Wenn den Chinesen keiner testen will, werde ich mir wohl eine 7i73 kaufen. Hab gerade eben herausgefunden, dass Portugal doch in der EU ist und deswegen kein Zoll zu zahlen ist.

I think what you experienced is expected behaviour. Once an axis is homed, it can't be homed again unless its unhomed. I did notice recently in a axis sim that the unhomed menu was not enabled...

Hi,
i modified the  mesa-smartserial-device-template a little bit
and put it on a cheap ESP32 8ch-Relay board for extra Outputs.

i used platformio as buildsystem for easy use, i have also test the code on raspberry-pico,

github.com/multigcs/SmartSerial-ESP32RelayX8Board/tree/main

www.youtube.com/shorts/6ZKBH5xW8OQ

Relay-Board: www.amazon.de/dp/B0FNRH8QSN

Optional: www.amazon.de/TECNOIOT-Two-Way-Transfer-...tional/dp/B081J5R35N

Works fine with 7i92, but have still problems with 7c81 SmartSerial connector, not shure why,
maybe my pinout is wrong or problems with the TX_en stuff.


my Board with RS422 mod:
 

We have ESI files and many examples,
But, of course a driver is better than ever

I have added the Material Thickness parameter option for Ohmic Probe with Material Height.

The updated files are in the attached qtvcp folder. It needs to be placed into your working machine config directory.
Also the attached custom_postgui.hal must also be in your machine config folder.

The qtplasmac-imperial_material.cfg file has the material thickness added, it has the settings for a Hypertherm Powermax 85.

Snowgoer, I'm not sure if the custom_postgui file is the proper place to do the hal pin linking. If you have time to review the changes and add it to the source code, I would appreciate it. Otherwise I can try to figure out git and do a pull request.