Advanced Search

More info
forum.xfce.org/viewtopic.php?id=16160

This is for Linux Mint, it is similar in XFCE somewhere in the menus, probably in startup applications or startup ...

Danke Dir, ich muss mich damit beschäftigen, ich kapier es nicht.

Habe jetzt vorerst mal einen custom M Code gemacht, den ich an den Anfang oder ans Ende des Programms setzte, der 2 Sek. einen Schmierimpuls auslöst.

On my machine the same. Firefox and terminal open when start the system.

A 7I96S + 7I88 would give you 12 or 13 stepgen outputs (depending
on whether you use the 7I88 as 7 stepgens+ RS-485 or 8 stepgens)

A 7I96S+ a common Mach 5 axis BOB (5ABOB) would give you 10

War mehr als Einstieg gedacht zum Anpassen. Fertiglösung zum Einkopieren hab ich nicht zur Hand.

How can I use 10 or 11 stepgen with mesa? What cards to be used?

Well, machine is not complete yet..I will share may be within a month

Der steigt beim laden der Komponenten aus, da alles schon vorhanden ist.
Die Zeit zwischen den Pulsen kann ich da auch nicht einstellen?

Ich hab mal meine Hal und Ini angehängt.

Seither habe ich einen Schalter für die Zentralschmierung in der Custom.Hal, das wurde zum testen ausgeklammert.

Oh sorry that it wasn't clear. With workspace I mean the Linux environment. So at one point which I don't quite remember, I had several terminal windows and Firefox open. Now every time I start Linux, even when I already closed all windows or opened others, it gets back to this state.

In what setups this is a problem? Parport?
If you have an ethercat servo, the servo takes care about the encoder pulses and you just read the position from the drive. So as long as the servo drives can keep up, lcnc side is ok.
I would assume this is the same with mesa stuff. The FPGA counts the pulses and lcnc just retrieves the pulse count periodically.

Or maybe I just misunderstand something.

Vielleicht diese HAL- Lösung hier:
forum.linuxcnc.org/49-basic-configuratio...ime-component#309957

BoxCNC wrote:

Hi. this archive can't exstract.

If using Debian:
sudo apt install unrar

Hi. this archive can't exstract.

Works fine for me.

Hi. this archive can't exstract.