1. User Interfaces
  3. Gmoccapy
  5. screen resolution

screen resolution

More
13 Apr 2016 14:53 #73235 by dinkata
screen resolution was created by dinkata
The minimum screen resolution for gmoccapy, using it without side panels is 979 x 750 Pixel.
Is it possible 800x600 for touch panel 12" .
I opened /usr/share/gmoccapy/gmoccapy.glade with Glade .
File read-only :( .Please tell Is it possible resolution 800x600 ?

Please Log in or Create an account to join the conversation.

More
13 Apr 2016 21:03 #73253 by newbynobi
Replied by newbynobi on topic screen resolution
Change the file rights and edit it to your needs.
Do ot delete or rename widgets and all should be fine!

Please Log in or Create an account to join the conversation.

More
14 Apr 2016 07:03 #73276 by newbynobi
Replied by newbynobi on topic screen resolution
In spanish, but a good guide to come to 800 x 480.




Norbert

Please Log in or Create an account to join the conversation.

More
14 Apr 2016 13:00 #73296 by dinkata
Replied by dinkata on topic screen resolution

In spanish, but a good guide to come to 800 x 480.

Norbert


I could not find it, please link :)

Please Log in or Create an account to join the conversation.

More
14 Apr 2016 16:44 #73315 by newbynobi
Replied by newbynobi on topic screen resolution
Strange, one post got lost and all the links and code :(
Very strange, so here again:

Gmoccapy 800x480

Norbert
The following user(s) said Thank You: dinkata

Please Log in or Create an account to join the conversation.

More
16 Apr 2016 02:53 #73385 by dinkata
Replied by dinkata on topic screen resolution
Thank You
Thank You
Thank You

Please Log in or Create an account to join the conversation.

More
17 Apr 2016 07:37 #73461 by dinkata
Replied by dinkata on topic screen resolution
gmoccapy_lcd7
Yes, I like it :) ,for now I see no keyboard in tool table editor :(

Please Log in or Create an account to join the conversation.

More
02 Jun 2016 14:45 #75338 by RotarySMP
Replied by RotarySMP on topic screen resolution
Hello Dinkata, did you reconfigure GMOCappy to 800x600? I also have 10" screen with this resolution, and intend to use it for a Lathe controller.

Mark

Please Log in or Create an account to join the conversation.

More
17 Aug 2016 13:07 - 18 Aug 2016 04:16 #78930 by dinkata
Replied by dinkata on topic screen resolution

Hello Dinkata, did you reconfigure GMOCappy to 800x600?
Mark

I use gmocappy_lcd 7 on 12" touch screen monitor for Lathe

Attachments:
Last edit: 18 Aug 2016 04:16 by dinkata.

Please Log in or Create an account to join the conversation.

  • tommylight
  • tommylight's Avatar
  • Away
  • Moderator
  • Moderator
More
17 Aug 2016 19:48 #78957 by tommylight
Replied by tommylight on topic screen resolution

Hello Dinkata, did you reconfigure GMOCappy to 800x600?
Mark

I use gmocappy_lcd 7 on 12" touch screen monitor for Lathe

Dang that is a nice setup. I can read "rucen hod" so that is Russian, right?? Meaning "manual movement" ???

Regards,
Tom

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
  1. User Interfaces
  3. Gmoccapy
  5. screen resolution
Time to create page: 1.028 seconds
Powered by Kunena Forum