Forum Menu

Gmoccapy - spindle restarts at program stop

More
2 years 10 months ago #288335 by Aciera
Replied by Aciera on topic Gmoccapy - spindle restarts at program stop
Current content is:
Code:
             try:                 buffer = glRenderMode(GL_RENDER)             except OverflowError:                 self.select_buffer_size *= 2                 continue             break

As we only want to select a single line it seems wrong to keep increasing the buffer size.

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago - 2 years 10 months ago #288336 by Aciera
Replied by Aciera on topic Gmoccapy - spindle restarts at program stop
Also
Code:
except OverflowError:

does not seem to catch the error in the first place.
Last edit: 2 years 10 months ago by Aciera.

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #288339 by Aciera
Replied by Aciera on topic Gmoccapy - spindle restarts at program stop
I have created a pull request:
github.com/LinuxCNC/linuxcnc/pull/2792/files
The following user(s) said Thank You: tommylight

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #289250 by HalaszAttila
Replied by HalaszAttila on topic Gmoccapy - spindle restarts at program stop
Hello,

is this Spindle Stop/Restart bug fixed in newest release (v2.9.2)?

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #289279 by HansU
Replied by HansU on topic Gmoccapy - spindle restarts at program stop

Hello,

is this Spindle Stop/Restart bug fixed in newest release (v2.9.2)?

No. And I can't reproduce this with a simulation config. I appreciate input on this.

Please Log in or Create an account to join the conversation.

More
2 years 10 months ago #289280 by HalaszAttila
Replied by HalaszAttila on topic Gmoccapy - spindle restarts at program stop
  I am trying now in v2.9.1, gmoccapy sim.
If i open arcspiral.ngc, or 3dchips.ngc from nc_files, i can't reproduce the problem, but if i open my gcode file (%fej.ngc - attached) the spindle is restarts after i press the program stop gui button.
I will try to find which g code in the file causes this behavior.  
Please try to run and stop the attached file. 

 

File Attachment:

File Name: fej.ngc
File Size:341.23 KB

Please Log in or Create an account to join the conversation.

Moderators: newbynobi, HansU
Time to create page: 0.139 seconds
Powered by Kunena Forum