Results of latency test, list of computers tested for use with LinuxCNC

LinuxCNC pc tests, version 20200930, started 26.11.2020 10:29:59 ******************************************************************************** General info: Dell Inc., OptiPlex 7010 Bios version A23, dated 08/09/2016 Chipset: Intel Corporation 7 Series/C216 Harddisk is rotational The amount of swap currently used is 648 ================================================================================ CPU related data: model name : Intel(R) Core(TM) i5-3470S CPU @ 2.90GHz cpu cores : 4 stepping : 9 cache size : 6144 KB ================================================================================ RAM related data: Maximum Capacity: 16 GB Size: 4096 MB Size: 4096 MB ================================================================================ GPU related data: product: Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller configuration: driver=i915 latency=0 ================================================================================ Parallel port related data: number of parallel ports is 0 ================================================================================ Os and desktop related data: PRETTY_NAME="Linux Mint 20" Should the info below not match with your machine, kindly post the output of pstree here, including a brief desciption of your desktop environment, window manager and display manager. Tia https://forum.linuxcnc.org/18-computer/39370-script-for-automated-testing-of-computer-latency Desktop environment : gnome Windowmanager : Metacity (Marco) Displaymanager : lightdm ================================================================================ Kernel related data: Kernel 4.9.0-13-rt-amd64 GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Cpu idle driver: intel_idle ================================================================================ Kernel modules data: Check if pcspkr is loaded: No, which is good! Check if snd modules are loaded: Yes, may cause bigger latency. can probably be disabled in bios, alternatively, you can run "./block-snd-modules" which has just now been created for your convenience. ================================================================================ Keyboard & Mouse related data: Number of mice: 1 Mouse 0 : Logitech Wireless Mouse Mice attached to USB: Keyboards attached to USB: Logitech, Inc. Keyboard K120 ================================================================================ LinuxCNC related data: LinuxCNC version is: 2.8.0.124.g4501e6d67 ================================================================================ Preparing for latency test: Started glxgears No. 1, 2, 3, 4, 5 .......... Started firefox with 'https://vimeo.com/150574260', WID 69206211 ================================================================================ Command for latency test is: su johwaa -c "latency-histogram --nobase --sbinsize 1000 --nox 2>&1 | tee -a 1606408155.lat &" Latency testing loop started Thu 26 Nov 2020 10:30:14 AM CST, should end after Thu 26 Nov 2020 12:30:14 PM CST ================================================================================ Swap useage: prerun: 648, running: 772 ================================================================================ CPU core temperatures: Core 0: Tmin: 71.0°C, Tmax: 76.0°C, (high = +93.0°C, crit = +103.0°C) Core 1: Tmin: 70.0°C, Tmax: 74.0°C, (high = +93.0°C, crit = +103.0°C) Core 2: Tmin: 70.0°C, Tmax: 75.0°C, (high = +93.0°C, crit = +103.0°C) Core 3: Tmin: 69.0°C, Tmax: 73.0°C, (high = +93.0°C, crit = +103.0°C) ================================================================================ last latency data is as follows:.

Core 0: +73.0°C (high = +93.0°C, crit = +103.0°C) Core 1: +73.0°C (high = +93.0°C, crit = +103.0°C) Core 2: +73.0°C (high = +93.0°C, crit = +103.0°C) Core 3: +70.0°C (high = +93.0°C, crit = +103.0°C) invalid command name "wm" while executing "wm withdraw ." (procedure "load_packages" line 4) invoked from within "load_packages" invoked from within "if ![info exists ::LH(start)] { set_defaults config progress "Loading packages" load_packages signal trap SIGINT finish progress "Making g..." (file "/usr/bin/latency-histogram" line 840)

LinuxCNC pc tests, version 20200930, started 29.11.2020 00:04:11 ******************************************************************************** General info: Gigabyte Technology Co., Ltd., X570 AORUS ELITE Bios version F11, dated 12/06/2019 Chipset: Harddisk is non-rotational, ie. SSD The amount of swap currently used is 0 ================================================================================ CPU related data: model name : AMD Ryzen 5 3500X 6-Core Processor cpu cores : 6 stepping : 0 cache size : 512 KB ================================================================================ RAM related data: Maximum Capacity: 128 GB Maximum Voltage: 1.2 V Maximum Voltage: 1.2 V Maximum Voltage: 1.2 V Maximum Voltage: 1.2 V Size: 4096 MB Non-Volatile Size: None Volatile Size: 4 GB Cache Size: None Logical Size: None Size: 4096 MB Non-Volatile Size: None Volatile Size: 4 GB Cache Size: None Logical Size: None Size: 4096 MB Non-Volatile Size: None Volatile Size: 4 GB Cache Size: None Logical Size: None Size: 4096 MB Non-Volatile Size: None Volatile Size: 4 GB Cache Size: None Logical Size: None ================================================================================ GPU related data: product: Ellesmere [Radeon RX 470/480/570/570X/580/580X/590] configuration: driver=amdgpu latency=0 ================================================================================ Parallel port related data: number of parallel ports is 0 ================================================================================ Os and desktop related data: PRETTY_NAME="Linux Mint 20" Should the info below not match with your machine, kindly post the output of pstree here, including a brief desciption of your desktop environment, window manager and display manager. Tia https://forum.linuxcnc.org/18-computer/39370-script-for-automated-testing-of-computer-latency Desktop environment : gnome Windowmanager : Metacity (Marco) Displaymanager : lightdm ================================================================================ Kernel related data: Kernel 4.9.0-13-rt-amd64 GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Cpu idle driver: acpi_idle ================================================================================ Kernel modules data: Check if pcspkr is loaded: [0;32mNo, which is good![0m Check if snd modules are loaded: [0;31mYes, may cause bigger latency.[0m can probably be disabled in bios, alternatively, you can run "./block-snd-modules" which has just now been created for your convenience. ================================================================================ Keyboard & Mouse related data: Number of mice: 1 Mouse 0 : Razer Razer DeathAdder Mice attached to USB: Razer USA, Ltd DeathAdder Mouse Keyboards attached to USB: Dell Computer Corp. Multimedia Pro Keyboard Dell Computer Corp. Multimedia Pro Keyboard Hub ================================================================================ LinuxCNC related data: LinuxCNC version is: 2.9.0~pre0.3030.g742c3e294 ================================================================================ Preparing for latency test: Started glxgears No. 1, 2, 3, 4, 5 .......... Started firefox with 'https://vimeo.com/150574260', WID 60819820 ================================================================================ Command for latency test is: su cnc -c "latency-histogram --nobase --sbinsize 1000 --nox 2>&1 | tee -a 1606604595.lat &" Latency testing loop started Sun 29 Nov 2020 12:04:24 AM CET, should end after Sun 29 Nov 2020 12:06:24 AM CET ================================================================================ Swap useage: prerun: 0, running: 0 ================================================================================ CPU core temperatures: 124 secs servo min: -17.600 uS max: 15.900 uS sdev: 1.600 uS 125 secs servo min: -17.600 uS max: 15.900 uS sdev: 1.600 uS