Hello, this is a reply to beauxnez post from few days ago."hello, is it possible to make an nvem card work with qtplasmac?" The answer is yes, another friend and myself are right at the end of a plasma machine build, were using a ec500 as the controller and it works fantastic with qtplasmac. I will say the THC is the only thing that we don't have working at the moment. On ours the plasma output is just on output 1, torch is either on or off. It goes from the board and turns a relay on and off which is the actual switch. For ours we have a Everlast 82i for the plasma cutter which has a 50:1 voltage divider, that gives us a 0 - 5v output for the torch voltage but from my understanding there aren't any analog inputs on these boards. A analog to digital converter may be a option. I'm not sure what the output of the mesa THCAD boards looks like, there may be a way to use one of those. I'm just getting started on trying to setup a arduino to take the analog voltage, work some magic on it, and send the info to linuxcnc that way using modbus. The downside I'm seeing to this approach is effectively I'm setting up a second controller to take just one analog input, and I'll have to put a switch inline on the ethernet cables. The upside is another controller and analog input, so now I can dream up more features to add to this machine (During our build process it started as a basic machine, we now have individual limit switches for every axis, probing, etc. , touchscreen interface, and so on..) I saw that you managed to make a card work under remora with qtplasmacmy card now works with the 3 axes under axisI would now like to pass it under qtplasmac, you can help me because I have an error message
I saw that you managed to make a card work under remora with qtplasmac
my card now works with the 3 axes under axis
I would now like to pass it under qtplasmac, I need help because I have an error message?
Attachment not found
Attachment not found
Attachment not found
