Custom Mint-19.2 with Linuxcnc

I think he got a little confused, it can happen at times.

On another note I have created a new image of Mint & RT that should boot from UEFI without having to change to a so called "Legacy mode". tested on VBox with UEFI enabled in a virtual machine.
Silly me was unaware that Cubic required the installation of syslinux & isolinux to create UEFI images.
Also have moved the readme to the desktop so hopefully it may get read more often. Just waiting from reply from another member about a message regarding "mismatched versions of a particular component". In this thread: forum.linuxcnc.org/9-installing-linuxcnc...ion-usb-not-bootable
No info has been given as where the message appears.

One thing to note is that when the image is created with UEFI support the image can be mounted from within caja, the non UEFI images wont mount unless manually loop mounted.

Welcome to a respin of Linux Mint 19.2 MATE
[hr]

• New 27 February 2020 11:14
• ISO is now UEFI bootable
• Moved this file to $HOME/Desktop


• New 22 February 2020 22:04
• QTVCP is now included
• Glade3.8.6 has been included
• HTML Docs have been included and added to CNC Menu
• $HOME/utils/bin/get_linuxcnc_build_deps.sh has been included
• Running this script by
  Code:

  sh ~/utils/bin/get_linuxcnc_build_deps.sh
• will download and install the dependencies to build linuxcnc form source
• JT's excellent tutorial can be found here to get sources from git and compiling
• www.gnipsel.com/linuxcnc/uspace/linuxmint19-emc.html


• Original Release
• Linux Mint 19.2 with RT_PREEMPT
• Linuxcnc v2.8 from sources dated 15 Feb 2020
• Geany, gFTP & Midnight commander included
• Gimp isn't the default program to open pdfs
• Initramfs modified to work when booted from a vfat filesystem, ie supports Multiboot
• No support for qtvcp but can be added later
• Mesaflash and limited hostmot2 firmware included
• If booting stalls on Regenerating SSL certifcates please press shift, on a VM make sure the keyboard is captured

Please use win32diskimager if using a windows machine to write image to disk.
In Linux dd is recommended.

Unlike other images I posted this has been created using a virgin install of Mint 19.2 on real hardware.
To apply updates to fresh install open a terminal and use the following, this should not upgrade the kernel.

Iso Image:
No longer available do not ask for access

MD5Sum:
No longer available do not ask for access

Many thanks to all who have downloaded, test, reported bugs and helped.

All issues and support should be directed to this thread.
forum.linuxcnc.org/9-installing-linuxcnc...t-19-2-with-linuxcnc

i was check , there are errors in the instructions of linuxcnc 2.8 "motion"

joint.N.joint−vel−cmd

rite is joint.N.vel−cmd

linuxcnc.org/docs/2.8/html/man/man9/motion.9.html

Hello,

Is it possible to 'produce' ISO file with RTAI for LPT ?

Thank you,

Emil

emilvv wrote: Hello,

Is it possible to 'produce' ISO file with RTAI for LPT ?

Thank you,

Emil

Check this topic near the start , there is a ready made RTAI ISO.

Hi,

My request is only if there is some new versions of included software or LCNC .. I have all ISO files already downloaded ..

Best regards,

Emil

tivoi wrote: i was check , there are errors in the instructions of linuxcnc 2.8 "motion"

joint.N.joint−vel−cmd

rite is joint.N.vel−cmd

linuxcnc.org/docs/2.8/html/man/man9/motion.9.html

Like I said before.
This is not an issue with the dvd, this is an issue with your configuration. Please start another thread supplying more information and your hal and ini files. If you keep asking the same question in this thread you will receive no more responses from myself. The is issue is with your configuration, not with the ISO image I produced.
The linux cnc package has been built from linuxcnc git sources, branch 2.8. I do no modify the sources. I do not modify the documentation. I only put everything to together in a convenient package. I have no control over the docs on the linuxcnc site, I have no part in producing any code nor any web pages.

If there is no post announcing a new version of an image there is no new version.
When I produce a new version I make a new post, the post will include the changes made and the download link to the new image. Due to space limitations the old version will be left up for a few days and the new version will move from a "testing" folder to the folder where the previous version was.

To improve these images we need feedback and any issues, if no feed back is given there is no way to know if things are good or bad. It's community effort.

i'm sorry
now i have prolem with linuxmint, it can boot in to os,
i need press some button like alt+ number or word


and this is boot mess after turn off computer without shutdown


b.r

CTR ALT F1 will get you a terminal
The issue is that you do not have permissions to write to the files, the permissions need changing.
All the times I have installed mint I have never had this problem occur, sometimes it does. Causes can be when installing you choose login without password or encrypt home directory.

login with your username & password


If the above instructions fail you can try reinstalling but do not select login without password nor encrypt home directory.