Please help me for uptate axis 2.5.4 to Gmoccapy

Hallo Siggi,

if you go to the settings page of gmoccapy (code = 123) (button with the tools on it), you can push the button "halshow" and within that program you can watch the hal pin.

Norbert

Hallo Siggi,

I just saw, that you did include a gmoccapy_postgui.hal file. Where did you take that one from?
Please check if that file does contain something like:
If there is a unlinkp in there, that is the reason, as you do connect that signals prior to WZW!

Norbert

The Werkzeugwechsler works with the old Version Axis 2.5.4
I am from Austria /Graz and i can install Teamviewer.

OK, Graz is a little to far to get a personal coffee from you

We can go on with teamviewer, after you checked the items I mentioned in the previous posts.

And please also change in Werkzeugwechsler.hal
to be
Avoid in Hal German Umlaute and "ß"

Norbert

ok,make this and crashed.

Debug file information:
.
/usr/bin/gmoccapy:237: GtkWarning: Invalid icon size 48

self.widgets.window1.show()

(gmoccapy:4515): GtkSourceView-CRITICAL **: gtk_source_language_manager_set_search_path: assertion `lm->priv->ids == NULL' failed
gmoccapy_postgui.hal:19: Pin 'iocontrol.0.tool-prep-number' was already linked to signal 'Werkzeugnummer'
4425
PID TTY STAT TIME COMMAND
4512
PID TTY STAT TIME COMMAND
Stopping realtime threads
Unloading hal components



Bullshit, can not easy install teamviewer

root@chiron:/home/chiron/linuxcnc# sudo apt-get install teamviewer_12.0.85001_i386.deb
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
E: Paket teamviewer_12.0.85001_i386.deb kann nicht gefunden werden.
E: Mittels regulärem Ausdruck »teamviewer_12.0.85001_i386.deb« konnte kein Paket gefunden werden.

any idea ?
@ Norbert, wen you comes to next Year CNCecke/Bayerntreffen,gives Schnitzel u. Bier + Nächtigung auf meine Rechnung
upd.: Teamviewer have install

OK, so I expressed myself not well.

You should not have any iocontrol.tool stuff in the postgui.

I edited the postgui.hal according to my knowledge.

Please replace yours with the attached one and report.

Norbert

Ok, M6T21 Spindel endladen funzt u. Werkzeugladen M6T6 funktioniert,Spindel dreht sich und bläst Druckluft aus :laugh:
Mail sendet from steirerman

Next Proplem, Spindel is on but not not enough speed , max 500 U/min

Spindel.hal you added the commands, but commented out at the same time other important stuff

Please change the "Betriebsmodus" partto be like mentioned above!

Norbert

I just noticed, if you just push the button spindle on, without having given a S value, the spindle will start with the default speed, you set on the settings page from gmoccapy.

Check the value in the gcode information frame!

Please try S3000 M3 from MDI.
Does that give a more convenient speed?

You need to set on the settings page also your max and min spindle velocities, actual it is set to 6000 rpm max.

Norbert