Please help me for uptate axis 2.5.4 to Gmoccapy

  • Weiler810T
  • Topic Author
  • New Member
  • New Member
More
8 years 10 months ago #103759 by Weiler810T
Replied by Weiler810T on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Will I try tomorrow, today I'm not bothered anymore ;)

Siggi

Please Log in to join the conversation.

  • Weiler810T
  • Topic Author
  • New Member
  • New Member
More
8 years 10 months ago #103784 by Weiler810T
Replied by Weiler810T on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Hallo Norbert

Have a Proplem with the Macro, Macro works but the toolsenor not works
Code:
task: main loop took 0.199020 seconds task: main loop took 0.100408 seconds Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden Cannot connect to server request channel jack server is not running or cannot be started task: main loop took 0.100012 seconds Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden Cannot connect to server request channel jack server is not running or cannot be started Emit interp-run 1 2 Emit interp-run toolprobe Emit interp-run 3 2 Emit interp-run G38.4: Bewegung ohne Kontaktschließung beendet. Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden Cannot connect to server request channel jack server is not running or cannot be started

Attachment not found



( wie kann ich denn Pin überprüfen ob er verbunden ist oder nicht ? Und warum zur Hölle muß die 1.te Zeile bei einen Macro frei bleiben, damit es funktioniert?)

Please Log in to join the conversation.

  • Weiler810T
  • Topic Author
  • New Member
  • New Member
More
8 years 10 months ago #103785 by Weiler810T
Replied by Weiler810T on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Sensor works, i switch NO to NC :whistle: :whistle:

I have a new Error, so what is that ?
Code:
emc/task/emctask.cc 389: interp_error: P value out of range with G10 L1 P value out of range with G10 L1 Cannot connect to server socket err = Datei oder Verzeichnis nicht gefunden Cannot connect to server request channel jack server is not running or cannot be started

Attachment not found

Please Log in to join the conversation.

More
8 years 10 months ago #103789 by newbynobi
Replied by newbynobi on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Hallo Siggi,

I can not understand, why the first line of your macro must be free, In my macros I do not have such problems.

The P error might be, because you use:

G10 L1 P#5400

Try to change to

G10 L1 P[#5400]

If you do not have a tool in your spindle, that value will be NULL, I do not know if that is allowed!
So better put a pseudo tool in your spindle.

Norbert

Please Log in to join the conversation.

  • Weiler810T
  • Topic Author
  • New Member
  • New Member
More
8 years 10 months ago #103791 by Weiler810T
Replied by Weiler810T on topic Please help me for uptate axis 2.5.4 to Gmoccapy

newbynobi wrote: Hallo Siggi,

I can not understand, why the first line of your macro must be free, In my macros I do not have such problems.

The P error might be, because you use:

G10 L1 P#5400

Try to change to

G10 L1 P[#5400]

If you do not have a tool in your spindle, that value will be NULL, I do not know if that is allowed!
So better put a pseudo tool in your spindle.

Norbert



I changed this, but the Error ist the same :blink:

Attachment not found

Please Log in to join the conversation.

  • Weiler810T
  • Topic Author
  • New Member
  • New Member
More
8 years 10 months ago #103795 by Weiler810T
Replied by Weiler810T on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Hallo Norbert

By the Way, in my Notbooksim works the Macro :silly:

Attachment not found




Siggi

Please Log in to join the conversation.

More
8 years 10 months ago #103799 by newbynobi
Replied by newbynobi on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Very strange,
I have no tool sensor connected at the moment, so I can also only test on sim.

Norbert

Please Log in to join the conversation.

  • Weiler810T
  • Topic Author
  • New Member
  • New Member
More
8 years 10 months ago #103813 by Weiler810T
Replied by Weiler810T on topic Please help me for uptate axis 2.5.4 to Gmoccapy

newbynobi wrote: Very strange,
I have no tool sensor connected at the moment, so I can also only test on sim.

Norbert


I change this, send with your address and I donate this tool :) :whistle:

Please Log in to join the conversation.

  • Weiler810T
  • Topic Author
  • New Member
  • New Member
More
8 years 10 months ago #103820 by Weiler810T
Replied by Weiler810T on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Macro works !!!! :woohoo: :laugh: :laugh: :laugh:
I delete this line
Code:
# The remap code REMAP=M6 modalgroup=6 prolog=change_prolog ngc=change epilog=change_epilog

but I now have negative values in my Tooltable , let's see where that comes from :ohmy:

Attachment not found




Siggi

@Norbert, Paket schicke ich am Dienstag weg ;)

Please Log in to join the conversation.

More
8 years 10 months ago #103838 by newbynobi
Replied by newbynobi on topic Please help me for uptate axis 2.5.4 to Gmoccapy
Mine are all negative, because my 3D- probe is longer than most of my tools?

Is that in your case also?

Please Log in to join the conversation.

Time to create page: 0.082 seconds
Powered by Kunena Forum