Another plasma component...

More
7 years 1 month ago #144798 by phillc54
Replied by phillc54 on topic Another plasma component...
Have you enabled multi spindle in your <machine>_connections.hal?

EDIT: Does the Arc OK led on the Monitor Panel light?

What GUI are you using?

Please Log in to join the conversation.

More
7 years 1 month ago #144800 by Franklin
Replied by Franklin on topic Another plasma component...
Yes I enabled multi spindle and changed the number of spindles to 3 in the ini file.
I use Axis GUI.

Please Log in to join the conversation.

More
7 years 1 month ago #144801 by Franklin
Replied by Franklin on topic Another plasma component...
And Arc OK led light on the Monitor Panel and on HAL Show too

Please Log in to join the conversation.

More
7 years 1 month ago #144802 by phillc54
Replied by phillc54 on topic Another plasma component...
Are you using a sim or a real config?

What value do you have for Torch On Time in the Config Panel?

Acually it doesn't wait for Arc OK, it uses the above time.

Please Log in to join the conversation.

More
7 years 1 month ago #144804 by Franklin
Replied by Franklin on topic Another plasma component...
I using a real config and it works fine except this function
I changed Torch On Time from 50 to 500 and nothing.
Earlier I used M10 file for turn Torch through the M64 / M65
But yesterday I wanted to try the built-in function and it didn’t work out.

Please Log in to join the conversation.

More
7 years 1 month ago #144806 by Franklin
Replied by Franklin on topic Another plasma component...
I meant that Torch On Time works, but the plasmaс repeats attempts in one place

Please Log in to join the conversation.

More
7 years 1 month ago #144807 by Franklin
Replied by Franklin on topic Another plasma component...
Today I’ll try to play with center mark again and take a video of how this happens

Please Log in to join the conversation.

More
7 years 1 month ago #144810 by phillc54
Replied by phillc54 on topic Another plasma component...
I cannot get it to behave that way.

When you post the video, could you post all your .ini file, all your .hal files and all your .cfg files.

Attached is a file I test with.

Please Log in to join the conversation.

More
7 years 1 month ago #144814 by Franklin
Replied by Franklin on topic Another plasma component...
I understood why this is happening
in the line "g1 x0.000001", I removed a few zeros, I didn’t think that this would affect anything!
Now I repeated your example exactly and everything works as it should. Sorry this is my carelessness.
Thank you for your responsiveness and for all your work.

Please Log in to join the conversation.

More
7 years 1 month ago #144815 by phillc54
Replied by phillc54 on topic Another plasma component...
Well I wouldn't have thought it would make a difference as well.
I'll have a look tomorrow.

Please Log in to join the conversation.

Time to create page: 0.193 seconds
Powered by Kunena Forum