Low budget plasma setup, what do I need?

More
7 years 2 months ago #141830 by rodw
Replied by rodw on topic Low budget plasma setup, what do I need?
Very nice.

I think you need to change the title of this thread Bengt.

It does not look low budget anymore!

Please Log in to join the conversation.

More
7 years 2 months ago #141845 by pl7i92
Replied by pl7i92 on topic Low budget plasma setup, what do I need?
things get quickly out of budget if you get good information

you can build from 1k-1mio

very nice indeed

Please Log in to join the conversation.

More
7 years 2 months ago #141867 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Thanks guys.

To me this is low budget as almost all parts are more or less to no cost. So far only stepper-motors, connectors, THCAD300 and PSU's have been thinning my slim wallet.

Next is to get all wired up and start testing the PC/MESA 7i90HD. Then it is time to have a look at PlasmaC and most likely I will need some advice from you guys.

Will probably shrink down my mechanical size to 500x500 as I do not have the space for the planned 500x 1000 that will be a bit heavy and cumbersome for an old fart like me to move from storage to cutting. More details to come but still same design.

Please Log in to join the conversation.

More
7 years 2 months ago #141872 by tommylight
Replied by tommylight on topic Low budget plasma setup, what do I need?

tecno wrote: Will probably shrink down my mechanical size to 500x500 as I do not have the space for the planned 500x 1000 that will be a bit heavy and cumbersome .......

Two hinges can do wonders ! Bolt it to the wall and bring it down only when you need it, otherwise it stays there kissing the wall and out of the way.

Please Log in to join the conversation.

More
7 years 2 months ago #141875 by pl7i92
Replied by pl7i92 on topic Low budget plasma setup, what do I need?
with 500x500 the Education cheep 700euro mashine jumps in at all costs including plasma s-cut50 with p80 nozzle
it is realy a low cost crap deal but it cuts the things as it shoudt
if you get all your EMI solved

Attachment not found

Please Log in to join the conversation.

More
7 years 2 months ago #141876 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?

tommylight wrote:

tecno wrote: Will probably shrink down my mechanical size to 500x500 as I do not have the space for the planned 500x 1000 that will be a bit heavy and cumbersome .......

Two hinges can do wonders ! Bolt it to the wall and bring it down only when you need it, otherwise it stays there kissing the wall and out of the way.


If it was that easy, I have no wall space to to that ;) I will have to make a stand that will be outside all year around and the CNC-frame to be stored inside when not in use.

Please Log in to join the conversation.

More
7 years 2 months ago #141877 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
We will hopefully soon see what kind of EMI issues I will have.

Please Log in to join the conversation.

More
7 years 2 months ago #141878 by tommylight
Replied by tommylight on topic Low budget plasma setup, what do I need?
@tecno
Having a lot of "space" problems here, too.

Please Log in to join the conversation.

More
7 years 2 months ago #142115 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Need some help here, I can not get PC to communicate with my 7i90.
Code:
bengt@plasma:~$ uname -a Linux plasma 4.9.0-9-rt-amd64 #1 SMP PREEMPT RT Debian 4.9.168-1+deb9u2 (2019-05-13) x86_64 GNU/Linux bengt@plasma:~$ bengt@plasma:~$ dmesg | grep par [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.011091] AppArmor: AppArmor disabled by boot time parameter [ 0.248159] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.574777] PM: Hibernation image partition 8:5 present [ 4.868714] ppdev: user-space parallel port driver [ 4.918583] PCI parallel port detected: 1415:8403, I/O at 0xec00(0xe880), IRQ 18 [ 4.918652] parport0: PC-style at 0xec00 (0xe880), irq 18 [PCSPP,TRISTATE,EPP] [ 5.016213] lp0: using parport0 (interrupt-driven). bengt@plasma:~$ bengt@plasma:~$ sudo mesaflash --device 7i90 --addr 0xec00 --readhmid [sudo] lösenord för bengt: ERROR: you must select transport layer for board bengt@plasma:~$

So what is wrong here?

Cheers
Bengt

Please Log in to join the conversation.

More
7 years 2 months ago #142117 by PCW
Replied by PCW on topic Low budget plasma setup, what do I need?
Well mesaflash is telling you in a rather terse way:

ERROR: you must select transport layer for board

did you try mesaflash -- help ?

Please Log in to join the conversation.

Time to create page: 0.352 seconds
Powered by Kunena Forum