Low budget plasma setup, what do I need?

More
7 years 2 months ago #142139 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
As this PC is still under evaluation for the plasma I will reinstall to get it working.

Is the 4.9+80+deb9u7 OK or is there other more new?

Please Log in to join the conversation.

More
7 years 2 months ago #142140 by PCW
Replied by PCW on topic Low budget plasma setup, what do I need?
The OS version is not really relevant as far as the problem you have goes (not finding drivers), that a LinuxCNC setup issue

How did you install LinuxCNC on your PC?

Please Log in to join the conversation.

More
7 years 2 months ago #142143 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
linuxcnc-stretch-uspace-amd64.iso Downloaded june 11

Please Log in to join the conversation.

More
7 years 2 months ago #142145 by PCW
Replied by PCW on topic Low budget plasma setup, what do I need?
OK, that should work as-is

is it possible you have added a new linuxCNC installation on top
of the base installation included with stretch?

Please Log in to join the conversation.

More
7 years 2 months ago #142146 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Only update / upgrade

// edit
Did not have any printerport PCI card installed then at time of ínstall, can this have caused issues?

Please Log in to join the conversation.

More
7 years 2 months ago #142148 by PCW
Replied by PCW on topic Low budget plasma setup, what do I need?
No, not finding the hm2_7i90 driver sounds like a LinuxCNC issue
I suspect the update broke something but cannot be sure
I guess I would try with a virgin Stretch test ISO install to see

Please Log in to join the conversation.

More
7 years 2 months ago #142219 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Did new Install and still no joy.

bengt@plasma:~$ halcmd -f
halcmd: loadrt hostmot2
<stdin>:1: waitpid failed /usr/bin/rtapi_app hostmot2
<stdin>:1: /usr/bin/rtapi_app exited without becoming ready
<stdin>:1: insmod for hostmot2 failed, returned -1
bengt@plasma:~$

So what can be wrong?

Please Log in to join the conversation.

More
7 years 2 months ago #142221 by tecno
Replied by tecno on topic Low budget plasma setup,going with 7i96
I have decided to go with 7i96 as it is easier to work with compared to pport and 7i90.

Please Log in to join the conversation.

More
7 years 2 months ago #142222 by PCW
Replied by PCW on topic Low budget plasma setup,going with 7i96
if "loardrt hostmot2" does not work, no Mesa cards will work

what do the commands

locate hostmot2
locate hm2_7i90

report?

Please Log in to join the conversation.

More
7 years 2 months ago #142223 by tecno
Replied by tecno on topic Low budget plasma setup,going with 7i96
The command locate does not exist

bengt@plasma:~$ locate hostmot2
bash: locate: kommandot finns inte
bengt@plasma:~$

Please Log in to join the conversation.

Time to create page: 0.129 seconds
Powered by Kunena Forum