Low budget plasma setup, what do I need?

tecno wrote: Please explain your question.

Run your German question via Google Translate.

I suspect he is Polish working in Germany from the Pl in his nic and from his writing. I might be wrong......

tecno wrote: Crimping is easy using HQ tools and 'correct' connector to cable in use !!!!

Does this help?


It never really matters in my experience if you use stranded or solid cable with the standard crimp connectors.
Everything will still be colour coded. Just determine if the cbale is wired to the A or B standard and make it straight through

Rod, there is a big difference in crimp quality if not using correct connectors. Two different beasts as regards the slotted prongs in the in the connector.

If using a stranded patch cable ALWAYS take a connector made for stranded wire!

why dident you set the eth connector to a place you can connect from outside
plug on plug is always more risk to get EMI inside errors as of ....
there are cheep cable case thrus that fut tight and let pas ETH plugs while tighten the cable behind

Why, in my case that would not be done with parts I have in the 19" rack.
7i96 is too wide to the red card rails.

Yes I know there are several ways to skin a cat but I found this to be less expensive and easy to fit. Also I want the rack box to be totally with connectors on all cables for ease of storing and no tangling cables.

agree to you
its somtimes the best to do more work on cabeling to get a clener setup

Time to unplug the thumb from my a**



Decided to shrink the working envelope to 500x500 and to skip rack/pinion and I will be using IGUS high helix screws instead.
Have had some issues with the driver box that now is sorted out so I can proceed with the software.

Cheers
Bengt

Some more sketching

Hi Tecno, it is a good idea to use IGUS high helix screw, I would like to see how they behave in steel dust environments.
regards
Chimeno

Hi Chimeno,
The dust/smoke is something I am pondering on how to protect linear guides and the screws,
Not easy task but Iwill try

Regards
Bengt