Low budget plasma setup, what do I need?

More
6 years 9 months ago #153909 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Step by step.....

Attachment not found

Please Log in to join the conversation.

More
6 years 9 months ago #153991 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Some more progress, now Y axis support is in the works ( not ready)

Attachment not found

Please Log in to join the conversation.

More
6 years 9 months ago #155026 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
At last the frame is assembled, got the parts for this few days ago. Weight now 16.9kg

Attachment not found

Please Log in to join the conversation.

More
6 years 5 months ago #166957 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Here som progress on my build.

3D printed the X/Y coupling.

Attachment not found


Attachment not found


Attachment not found

Please Log in to join the conversation.

More
6 years 5 months ago #166960 by tommylight
Replied by tommylight on topic Low budget plasma setup, what do I need?
Nice and clean ! :)
Those two motors look a bit off, what is the drive going to be ? Belts ? Screws?

Please Log in to join the conversation.

More
6 years 5 months ago #166962 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
forum.linuxcnc.org/plasma-laser/36415-lo...eed?start=250#153991

Screws

Please Log in to join the conversation.

More
6 years 5 months ago #166964 by tommylight
Replied by tommylight on topic Low budget plasma setup, what do I need?
That works !
Thank you.

Please Log in to join the conversation.

More
6 years 5 months ago #167015 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Some more details printed.

Attachment not found


Attachment not found

Please Log in to join the conversation.

More
6 years 5 months ago #167021 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?

Attachment not found

Please Log in to join the conversation.

More
6 years 5 months ago #167023 by tommylight
Replied by tommylight on topic Low budget plasma setup, what do I need?
Enjoy it while it is still clean, once you start using it, it will be dirtyyyyyyyy. :)

Please Log in to join the conversation.

Time to create page: 0.143 seconds
Powered by Kunena Forum