Low budget plasma setup, what do I need?

More
6 years 5 months ago #169399 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Oops...
Thank's for that Clive. Back to the drawing board.

Please Log in to join the conversation.

More
6 years 5 months ago #169446 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
New printed part

Attachment not found

Please Log in to join the conversation.

More
6 years 5 months ago #169455 by tommylight
Replied by tommylight on topic Low budget plasma setup, what do I need?
Ssshhh, i see ice cream ! :)

Please Log in to join the conversation.

More
6 years 5 months ago #169459 by Clive S
Replied by Clive S on topic Low budget plasma setup, what do I need?

tecno wrote: New printed part

Attachment not found


Much better well done looking forward to the first cut:)

Please Log in to join the conversation.

More
6 years 4 months ago #169802 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
Here now on a temporary stand. (This is EU pallet legs for making a worktable of a pallet.)

Attachment not found




Time to hook up cables and do some dry run testing of all axis.

Please Log in to join the conversation.

More
6 years 4 months ago #169829 by Mike_Eitel
Replied by Mike_Eitel on topic Low budget plasma setup, what do I need?
That is looking nice and light too.
Wish you that you will be happy with the functionality too.
Mike

Please Log in to join the conversation.

More
6 years 4 months ago #169830 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
I sure hope it will work ;)

Please Log in to join the conversation.

More
6 years 4 months ago #169933 by tecno
Replied by tecno on topic Low budget plasma setup, what do I need?
So what is this? Tipi for heavy rain cutting outside? EMI Faraday cage?

Attachment not found

Please Log in to join the conversation.

More
6 years 4 months ago #169948 by tommylight
Replied by tommylight on topic Low budget plasma setup, what do I need?
I would venture a guess at it being the torch cable holder.... :)

Please Log in to join the conversation.

More
6 years 4 months ago #169956 by Mike_Eitel
Replied by Mike_Eitel on topic Low budget plasma setup, what do I need?
Nope... As you are Swedish ... Starting point of heat recycler...
via a private moonshine apparatus ;-)

Please Log in to join the conversation.

Time to create page: 0.489 seconds
Powered by Kunena Forum