Plasmac 758 topics

A place to ask questions about the Plasmac interface

Subject	Replies / Views	Last Post
Photos Category: Plasmac Topic started 4 years 7 months ago, by aabtech Last Post 4 years 7 months ago by aabtech	Replies:4 Views:1453	Last Post by aabtech 4 years 7 months ago
QtPlasmaC conversational gcode Category: Plasmac Topic started 4 years 7 months ago, by robertspark Last Post 4 years 7 months ago by phillc54	Replies:4 Views:1649	Last Post by phillc54 4 years 7 months ago
Question about THCAD-10 Category: Plasmac Topic started 4 years 7 months ago, by aabtech Last Post 4 years 7 months ago by tommylight	Replies:1 Views:1164	Last Post by tommylight 4 years 7 months ago
(SOLVED) Segmentation errors Category: Plasmac Topic started 4 years 7 months ago, by Howlingg Last Post 4 years 7 months ago by tommylight 1 2	Replies:10 Views:4282	Last Post by tommylight 4 years 7 months ago
Valid arc lost & top limit is reached while THC moving up Category: Plasmac Topic started 4 years 8 months ago, by sharp_reaper Last Post 4 years 7 months ago by sharp_reaper 1 2 3 4	Replies:39 Views:6803	Last Post by sharp_reaper 4 years 7 months ago
docs minor correction / check Category: Plasmac Topic started 4 years 7 months ago, by robertspark Last Post 4 years 7 months ago by snowgoer540	Replies:1 Views:1042	Last Post by snowgoer540 4 years 7 months ago
THCAD-300 FOR BOB Category: Plasmac Topic started 4 years 7 months ago, by aabtech Last Post 4 years 7 months ago by aabtech	Replies:3 Views:1348	Last Post by aabtech 4 years 7 months ago
Hole cut and fusión 360 Category: Plasmac Topic started 4 years 7 months ago, by paulsao Last Post 4 years 7 months ago by paulsao	Replies:0 Views:1157	Last Post by paulsao 4 years 7 months ago
Slow My Z Axis Down (losing steps) -Mesa 7i96 Category: Plasmac Topic started 4 years 7 months ago, by Nick7251 Last Post 4 years 7 months ago by rodw	Replies:6 Views:1291	Last Post by rodw 4 years 7 months ago
Qtvcp Category: Plasmac Topic started 4 years 8 months ago, by aabtech Last Post 4 years 7 months ago by aabtech	Replies:7 Views:1722	Last Post by aabtech 4 years 7 months ago
THC for Hypertherm 45XP based on DT-115 / LM393 comparator Category: Plasmac Topic started 6 years 2 weeks ago, by radek_marko Last Post 4 years 8 months ago by Lilow 1 2 3 4	Replies:30 Views:7768	Last Post by Lilow 4 years 8 months ago
PlasmaC THCAD-10 Category: Plasmac Topic started 4 years 8 months ago, by Aldenflorio Last Post 4 years 8 months ago by phillc54 1 2	Replies:18 Views:4225	Last Post by phillc54 4 years 8 months ago
QtPlasmaC backplot for previous cuts Category: Plasmac Topic started 4 years 8 months ago, by Howlingg Last Post 4 years 8 months ago by phillc54	Replies:1 Views:1189	Last Post by phillc54 4 years 8 months ago
Float switch on 7i96 Category: Plasmac Topic started 4 years 8 months ago, by salem747 Last Post 4 years 8 months ago by PCW	Replies:4 Views:1485	Last Post by PCW 4 years 8 months ago
7i96 Configuration Problems Category: Plasmac Topic started 4 years 10 months ago, by salem747 Last Post 4 years 8 months ago by PCW 1 2 3 ... 5	Replies:40 Views:7788	Last Post by PCW 4 years 8 months ago
Debounce Category: Plasmac Topic started 4 years 8 months ago, by salem747 Last Post 4 years 8 months ago by rodw	Replies:1 Views:1483	Last Post by rodw 4 years 8 months ago
Voltage Scale and Auto Volts Category: Plasmac Topic started 4 years 10 months ago, by CFE Last Post 4 years 8 months ago by CFE 1 2 3 ... 5	Replies:46 Views:10.3k	Last Post by CFE 4 years 8 months ago
Cannot get coefficient for plasmac (THCAD 10) Category: Plasmac Topic started 4 years 8 months ago, by ML Last Post 4 years 8 months ago by snowgoer540	Replies:1 Views:1257	Last Post by snowgoer540 4 years 8 months ago
Help configuring a Pendant Category: Plasmac Topic started 4 years 10 months ago, by Jflesburg Last Post 4 years 9 months ago by cmorley 1 2	Replies:14 Views:4555	Last Post by cmorley 4 years 9 months ago
ERROR: pierce height would exceed Z axis maximum limit Category: Plasmac Topic started 4 years 9 months ago, by rodw Last Post 4 years 9 months ago by snowgoer540	Replies:4 Views:1676	Last Post by snowgoer540 4 years 9 months ago

Time to create page: 0.045 seconds