Сustomization QTvcp

More
6 years 5 months ago #167099 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Updated linuxcnc. There is no percentLoaded signal in the designer. Qtaxis does not render the downloaded file. What am I doing wrong?

Please Log in to join the conversation.

More
6 years 5 months ago #167100 by cmorley
Replied by cmorley on topic Сustomization QTvcp
Then you haven't got the updates yet.
Maybe the buildbot hasn't built them yet..

Please Log in to join the conversation.

More
6 years 5 months ago #167106 by hottabich
Replied by hottabich on topic Сustomization QTvcp
If it works then QtVCP is the best !!! Many thanks to you for your hard work!

Please Log in to join the conversation.

More
6 years 5 months ago #167128 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Did as in the screenshot. Got an error. Where am I wrong?

Please Log in to join the conversation.

More
6 years 5 months ago #167136 by cmorley
Replied by cmorley on topic Сustomization QTvcp
in .ui the widget is called progressBar, in handler progressbar

Please Log in to join the conversation.

More
6 years 5 months ago #167142 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Thank you fixed it when, loading it works fine but when executed it does not display percentages, but filling is in progress.

Please Log in to join the conversation.

More
6 years 5 months ago #167143 by cmorley
Replied by cmorley on topic Сustomization QTvcp
There is a signal from the gcode editor 'percentDone'
use the same process to connect it in designer to the percenetDone function in the handler file.

Please Log in to join the conversation.

More
6 years 5 months ago #167144 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Connected, everything works !!! Respect and respect to you!

Please Log in to join the conversation.

More
6 years 5 months ago #167653 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Hello! Going back to NO_FORCE_HOMING = 1. File uploads without all homed and executed. Does not work offset origin and tool table requiring all homed. In axis, gmoccapy in this mode it all works. In qtpyvcp also works. In QtVCP it can be fixed?

Please Log in to join the conversation.

More
6 years 5 months ago #167677 by cmorley
Replied by cmorley on topic Сustomization QTvcp
Should be fixed now.

Chris

Please Log in to join the conversation.

Time to create page: 0.260 seconds
Powered by Kunena Forum