Сustomization QTvcp

There is an interesting question. I added Plot to the Probe page. Why are two GcodeGraphics conflicting? And is there a possibility to add a button in Qtvcp
ProbeSim?

plotting uses a fair amount of process power. There is a special widget to move other widgets from place to place. QtDefault demonstrates this with the 'big view' button. it cycles the display by moving widgets around.
This might be better way to do it - its a little complicated. I'll have to refresh my memory on the widget.

I have not tried two plotters so I don't know what the problem is.

add a button for what?

Launch my interface and switch the visualization p, x, y, z and also move
picture in the window. Everything is necessary for checking Probe in simulator. ProbeSim mimics
(probe in). (QtDefault demonstrates this with the 'big view' button. it cycles the display by moving widgets around.)
If so make it super!

Get a button to call this function when pressed and released.

Here is proof of concept.
I modified qtdragon.ui and qtdragon_handler.py

When you switch tabs it automatically moves the plotter to the right spot by calling the function switch()
The special widget is called widgetswitcher.

Thank you very much!!! You are the best !!

cmorley wrote: Get a button to call this function when pressed and released.

Code:

def SimProbeButton(self, state): if state: hal.set_P('motion.probe-input','1') else: hal.set_P('motion.probe-input','o')

Created the btn_probesim button in qtdragon_postgui.hal added (net qtdragon.btn.0.probesim => motion.probe-input). Motion.probe-input does not work, qtdragon.btn_probesim works. Please tell me what's wrong? Excuse for troubling. The question is closed. Everything is working. In qtdragon_postgui.hal added
(net btn_probesim motion.probe-input qtdragon.btn_probesim).

Ok if you use your solution then you don't need the'SimProbeButton' function I posted

Your probe tab looks good!

Chris

Hello Chris! I resized qtdragon to 1900x1000, which turned out to be an interesting option for
fullHD monitor owner. I want to add widgetswitcher to the Status page, but it will be the second in the interface. I could not get. Is it real or impossible?

Should be possible. I'm working out of town for a few days...so cant help at the moment.