Сustomization QTvcp

cmorley
Offline
Platinum Member

6 years 6 months ago #164046 by cmorley

Replied by cmorley on topic Сustomization QTvcp

macrotab is fixed

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #164047 by hottabich

Replied by hottabich on topic Сustomization QTvcp

I use macrotab the one that you edited before after updating linuxcnc macrotab did not work for me. Please post corrected.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 6 months ago #164048 by cmorley

Replied by cmorley on topic Сustomization QTvcp

change macro_widget.py to

Code:

    def _hal_init(self):
        self.runButton.setEnabled(False)
        STATUS.connect('state-off', lambda w: self.runButton.setEnabled(False))
        STATUS.connect('state-estop', lambda w: self.runButton.setEnabled(False))
        STATUS.connect('interp-idle', lambda w: self.runButton.setEnabled(STATUS.machine_is_on()
                                                                and (STATUS.is_all_homed()
                                                                or INFO.NO_HOME_REQUIRED)))
        STATUS.connect('interp-run', lambda w: self.runButton.setEnabled(False))
        STATUS.connect('not-all-homed', lambda w, axis: self.runButton.setEnabled(False or INFO.NO_HOME_REQUIRED))
        STATUS.connect('all-homed', lambda w: self.runButton.setEnabled(True))
        STATUS.connect('general',self.returnFromDialog)

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #164049 by hottabich

Replied by hottabich on topic Сustomization QTvcp

Thank you so much!!!

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #164116 by hottabich

Replied by hottabich on topic Сustomization QTvcp

Load dialog action. Load file all OK. Exit. Start error: file ended without a percent sign. Maybe because there is still a file manager? File manager all OK.Please, your advice.

Please Log in to join the conversation.

tommylight
Offline
Administrator

6 years 6 months ago #164124 by tommylight

Replied by tommylight on topic Сustomization QTvcp

Gcode file needs % sign at the beginning and at the end.

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #164127 by hottabich

Replied by hottabich on topic Сustomization QTvcp

The same file downloaded through the file manager is OK.
In other Qtvcp interfaces, the Load dialog action does not display the error of the same files.
Typically, the file ends with M2.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 6 months ago #164165 by cmorley

Replied by cmorley on topic Сustomization QTvcp

i don't know where to start. I tried your hazzy program and it loads fine here.
When you load the file, does it the gcode look right?
Have you loaded a macro before loading the program?

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #164188 by hottabich

Replied by hottabich on topic Сustomization QTvcp

I added action button load_dialog_action in qtdragon. When downloading a file through a pop-up window, I get an error. File Manager from the page
File uploads work well. Why is that? See post 164116, 164127.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 6 months ago #164197 by cmorley

Replied by cmorley on topic Сustomization QTvcp

ok great I'll check it out.

Please Log in to join the conversation.

Time to create page: 0.368 seconds