Сustomization QTvcp

More
6 years 6 months ago #164036 by cmorley
Replied by cmorley on topic Сustomization QTvcp
If you have not homed then the button will say you have not homed.
NO_FORCE_HOMING =1 does not change that.

I found the problem with macroTab will push a fix soon.

Please Log in to join the conversation.

More
6 years 6 months ago #164037 by cmorley
Replied by cmorley on topic Сustomization QTvcp
Just pushed a fix for the macroTab

Please Log in to join the conversation.

More
6 years 6 months ago #164038 by hottabich
Replied by hottabich on topic Сustomization QTvcp
I don’t know how, but in qtpyvcp, the Home All button at start is cheked and home X, Y, Z no.
Button All Home just should glow green. This does not mean that axis = 0.

Please Log in to join the conversation.

More
6 years 6 months ago #164039 by cmorley
Replied by cmorley on topic Сustomization QTvcp
Yes, It's possible to do that but it's a lie. The machine is not homed.

Please Log in to join the conversation.

More
6 years 6 months ago #164040 by cmorley
Replied by cmorley on topic Сustomization QTvcp
If you don't want to home then why not remove the button?

Please Log in to join the conversation.

More
6 years 6 months ago #164041 by cmorley
Replied by cmorley on topic Сustomization QTvcp
It should not glow green - the machine is not homed.

NO_FORCE_HOMING = 1 does not mean linuxcnc starts already homed.

It means you are not required to home to run MDI or programs.

Please Log in to join the conversation.

More
6 years 6 months ago #164042 by hottabich
Replied by hottabich on topic Сustomization QTvcp
The button indicates that the machine is ready for use! Yes the car is not homed!

Please Log in to join the conversation.

More
6 years 6 months ago #164043 by cmorley
Replied by cmorley on topic Сustomization QTvcp
remove the button - it's useless if you are not going to home :)

Please Log in to join the conversation.

More
6 years 6 months ago #164044 by cmorley
Replied by cmorley on topic Сustomization QTvcp
In the handler file try:
Code:
def initialized__(self): self.set_dro_homed(True)

Please Log in to join the conversation.

More
6 years 6 months ago #164045 by hottabich
Replied by hottabich on topic Сustomization QTvcp
Without homed, it is necessary when processing large files in case of emergency stop, but otherwise the traditional mode. Can macrotab be fixed?

Please Log in to join the conversation.

Time to create page: 0.206 seconds
Powered by Kunena Forum