Сustomization QTvcp

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #163460 by hottabich

Сustomization QTvcp was created by hottabich

There is no Max_velocity_override adjustment in the Qtvcp interface. I added a panel. The slider adjusts the speed correctly, but I can’t adjust the percent. Status max_vel_ovr vibran.
Please tell me what is wrong.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 6 months ago #163488 by cmorley

Replied by cmorley on topic Сustomization QTvcp

In Qtvcp (and others screens), max velocity is in absolute units per minute, not percent.

You could build what you want but it would require python programming.

Chtis

Please Log in to join the conversation.

tommylight
Offline
Administrator

6 years 6 months ago #163499 by tommylight

Replied by tommylight on topic Сustomization QTvcp

cmorley wrote: In Qtvcp (and others screens), max velocity is in absolute units per minute, not percent.

You could build what you want but it would require python programming.

Chtis

Changed the name? Going for witnes protection?

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 6 months ago #163502 by cmorley

Replied by cmorley on topic Сustomization QTvcp

oops -you figured it out!

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #163515 by hottabich

Replied by hottabich on topic Сustomization QTvcp

Can you do something with this? The question is closed. I assigned the necessary speeds to the buttons and everything works. Thanks for the consultation!

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 6 months ago #163529 by cmorley

Replied by cmorley on topic Сustomization QTvcp

To add a max velocity slider.
add a QSlider with designer called 'mvPercent'
then in your handler file:

Code:

   def initialized__(self):
        self.w.mvPercent.setMaximum(100)
        STAT.connect('max-velocity-override-changed', lambda w, data: self.w.mvPercent.setValue((data / INFO.MAX_TRAJ_VELOCITY)*100))
        self.w.mvPercent.valueChanged.connect(self.setMVPercentValue)

    #####################
    # GENERAL FUNCTIONS #
    #####################
    def setMVPercentValue(self, value):
        ACTION.SET_MAX_VELOCITY_RATE(INFO.MAX_TRAJ_VELOCITY * (value/100.0))

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #163575 by hottabich

Replied by hottabich on topic Сustomization QTvcp

Thank you so much! Very good as a basic option. It’s more convenient for me
actual speed value on the button.

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #163862 by hottabich

Replied by hottabich on topic Сustomization QTvcp

File ini / TRAJ - NO_FORCE_HOMING = 1. At start, the tool position is the same
as exit, Home_All button green, the interface is active but does not work like that. How to fix please tell me.

Please Log in to join the conversation.

cmorley
Offline
Platinum Member

6 years 6 months ago #163895 by cmorley

Replied by cmorley on topic Сustomization QTvcp

I'm looking into this. I see it complains when you select the MDI line, but I can't find the source of that complaint....

Please Log in to join the conversation.

hottabich
Topic Author
Offline
Platinum Member

6 years 6 months ago #163897 by hottabich

Replied by hottabich on topic Сustomization QTvcp

At start qtdragon G54 should beat X = 0, Y = 0, Z = 0. Button Home All = All Homed. Homing mode no. Can I do this?

Please Log in to join the conversation.

Time to create page: 0.553 seconds