So this is the relevant code in action_button.py
it checks what spindle you wish to start (-1 means all spindles)
If the spindle is running it speeds them up.
If the spindle isn't running it starts it at the default spindle speed.
Code:
elif self.spindle_up:
if self.joint == -1:
a = 0
b = INFO.AVAILABLE_SPINDLES
else:
a = self.joint
b = self.joint +1
for i in range(a,b):
if STATUS.is_spindle_on(i):
ACTION.SET_SPINDLE_FASTER(i)
else:
ACTION.SET_SPINDLE_ROTATION(linuxcnc.SPINDLE_FORWARD,
INFO['DEFAULT_SPINDLE_{}_SPEED'.format(i)],i)
Here might be a function to add to the handler file to be called from a button.
You would need to use designer to connect a signal to it.
It assumes you only wish to speed up the spindle number 0
Code:
def spindle_faster(self, state):
if state:
if STATUS.is_spindle_on(i):
ACTION.SET_SPINDLE_FASTER(0)
Chris
